GitBucket
Newer
<!-- 第一套：0.02级活塞式压力计 -->
<!-- 检定数据管理详情模板 -->
<script lang="ts" setup name="MeasureDataTemplateDetail">
import { ref } from 'vue'
import { ElLoading, ElMessage } from 'element-plus'
import dayjs from 'dayjs'
import changeRecord from '../changeRecord.vue'
import selectStandard from '../../dialog/selectStandardDialog.vue'
import TemplateFormAndTable from '../templateFormAndTable.vue'
import { useSolveFormData } from '../useSolveFormData'
import { useZeroDriftResult } from '../../useCaculate'
import type { IDetailMeasureList } from './fourth-interface'
import useUserStore from '@/store/modules/user'
import type { dictType } from '@/global'
import { getDictByCode } from '@/api/system/dict'
import type { TableColumn } from '@/components/NormalTable/table_interface'
import { calculateHandle, getInfo } from '@/api/business/taskMeasure/measureData'
import { getInfo as getItemInfo, getSlopeB } from '@/api/business/measure/item'
import { useCheckList } from '@/commonMethods/useCheckList'
import multiTable from '@/components/MultiHeaderTable/index.vue'
import { calc } from '@/utils/useCalc'
const props = defineProps({
infoId: String, // id
dataNo: String, // 检定数据编号
})
const emits = defineEmits(['giveInfoId'])
const user = useUserStore() // 用户信息
const $router = useRouter() // 关闭页面使用
const $route = useRoute() // 路由参数
const ruleFormRef = ref() // 表单ref
const templateFormAndTableRef = ref() // 表单和被检设备、测量设备表格公共组件ref
const itemFormData = ref({ // 有关于检定项的数据
itemId: '', // 检定项id
itemCategoryName: '', // 设备检定项分类名称
itemCategoryId: '', // 设备检定项分类名称id
belongStandardEquipment: '', // 标准装置code
belongStandardEquipmentName: '', // 标准装置名称
appearance: '', // 外观（1/0）
appearanceRemark: '', // 外观备注说明
pointerDeflectionStability: '', // 指针偏转平稳性
pointerDeflectionStabilityRemark: '', // 指针偏转平稳性备注说明
tightness: '', // 密封性
tightnessRemark: '', // 密封性备注说明
zeroDriftResult: '', // 零位飘移结果（合格/不合格，直接存文字）
insulationResistance: '', // 绝缘电阻
insulationResistanceRemark: '', // 绝缘电阻备注说明-0.02活塞式压力计
workLineEquation: '1', // 工作直线方程
cycleNumber: 0, // 循环次数
maxIndicatingError: '', // 最大误差(示值误差最大值)
indicatingError: '', // 示值误差允许值(示值误差)
maxReturnError: '', // 最大回差(回程误差最大值)
returnError: '', // 回差（允许回差）
tempData: '', // 无用，计算输出时去掉
outcome: '', // 结果（合格、不合格）
remark: '', // 备注
otherOutcome: '', // 结果(检定数据中有2个表格情况下的第2个表中的合格/不合格)(前端判断)
otherRemark: '', // 备注(检定数据中有2个表格情况下的第2个表中的备注)
interceptA: '', // 截距a
slopeB: '', // 斜率b
sensitivityB: '', // 灵敏度b
repeatabilityR: '', // 重复性ξR
hysteresisH: '', // 迟滞ξH
linearL: '', // 线性ξL
basicErrorA: '', // 基本误差A
periodicStabilitySB: '', // 周期稳定性Sb
lastCycleSensitivity: '', // 上一周期灵敏度b0
supplyVoltage: '', // 供电电压
})
const measureItemConfigPistonGauge = ref() as any // 输入配置
const tableLoadingTop = ref(false)
const tableLoadingBottom = ref(false)
const pressureSensorTableLoading = ref(false) // 压力传感器loading
const inputList = ref([]) as any
const eqptEquipmentId = ref('') // 受检设备id（压力传感器获取上一周期灵敏度b0使用）
// -------------------------------------------路由参数------------------------------------------
const pageType = ref('add') // 页面类型: add, edit, detail
const infoId = ref('') // 列表id
if ($route.params && $route.params.type) {
pageType.value = $route.params.type as string
if ($route.params.id) {
infoId.value = $route.params.id as string
}
}
// --------------------------------------------字典--------------------------------------
const workingLinearEquationList = ref<dictType[]>([])// 工作直线方程
async function getDict() {
// 工作直线方程
getDictByCode('workingLinearEquation').then((response) => {
workingLinearEquationList.value = response.data
})
}
getDict()
// ------------------------------------------标签----------------------------------------------------------
const radioMenus = ref([ // 标签内容
{ name: '检定数据', value: 'measure-data' },
{ name: '历史修改记录', value: 'change-record' },
])
const current = ref('measure-data') // 选择的tab 默认基本信息
// ---------------------------------------检定项数据表格----------------------------------------------------
const list = ref<IDetailMeasureList[]>([]) // 表格数据
const resultList = ref<IDetailMeasureList[]>([]) // 结果表格数据
const listElectricContact = ref<IDetailMeasureList[]>([]) // 电接点一般压力表表格数据
const resultListElectricContact = ref<IDetailMeasureList[]>([]) // 电接点一般压力表第二结果表格数据
const measureColumns = ref([]) as any // 表头数据
const columns_generalPurposegauge = ref([ // 一般压力表、精密压力表、电接点一般压力表
{ text: '标准器示值', value: 'indicatingValue', align: 'center', required: true, type: 'text' },
{
text: '轻敲前被检设备示值',
value: 'beforeFrictionStroke',
align: 'center',
required: true,
children: [
{ text: '正行程', value: 'beforeFrictionForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'beforeFrictionReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{
text: '轻敲后被检设备示值',
value: 'afterFrictionStroke',
align: 'center',
required: true,
children: [
{ text: '正行程', value: 'afterFrictionForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'afterFrictionReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{
text: '轻敲前后变动量',
value: 'variationStroke',
align: 'center',
required: true,
children: [
{ text: '正行程', value: 'variationForwardStroke', align: 'center', required: true, type: 'text' },
{ text: '反行程', value: 'variationReverseStroke', align: 'center', required: true, type: 'text' },
],
},
])
// 生成结果表头--一般压力表
const result_columns_generalPurposegauge = ref([
{ text: '项目', value: 'item', align: 'center', required: true },
{ text: '示值误差允许值', value: 'indicatingError', align: 'center', required: true },
{ text: '示值误差最大值', value: 'maxIndicatingError', align: 'center', required: true },
{ text: '轻敲位移允许值', value: 'frictionError', align: 'center', required: true },
{ text: '轻敲位移最大值', value: 'maxFrictionError', align: 'center', required: true },
{ text: '回程误差允许值', value: 'returnError', align: 'center', required: true },
{ text: '回程误差最大值', value: 'maxReturnError', align: 'center', required: true },
])
// 精密压力表
const result_columns_precisionPressuregauge = ref([
{ text: '示值误差允许值', value: 'indicatingError', align: 'center', required: true },
{ text: '示值误差最大值', value: 'maxIndicatingError', align: 'center', required: true },
{ text: '轻敲位移允许值', value: 'frictionError', align: 'center', required: true },
{ text: '轻敲位移最大值', value: 'maxFrictionError', align: 'center', required: true },
{ text: '回程误差允许值', value: 'returnError', align: 'center', required: true },
{ text: '回程误差最大值', value: 'maxReturnError', align: 'center', required: true },
])
const columns_digitalMultimeterTable = ref([ // 压力变送器
{ text: '标准器示值', value: 'indicatingValue', align: 'center', required: true, type: 'text' },
{ text: '理论输出值', value: 'theoreticalOutputValue', align: 'center', required: true, type: 'text' },
{
text: '第一次',
value: 'firstStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'firstForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'firstReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{
text: '第二次',
value: 'secondStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'secondForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'secondReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{
text: '第三次',
value: 'thirdStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'thirdForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'thirdReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{ text: '示值误差', value: 'indicatingError', align: 'center', required: false, type: 'text' },
{ text: '回程误差', value: 'returnError', align: 'center', required: false, type: 'text' },
])
const result_columns_digitalMultimeterTable = ref([ // 压力变送器结果表格
{ text: '最大误差', value: 'maxIndicatingError', align: 'center', required: true, type: 'text' },
{ text: '示值误差允许值', value: 'indicatingError', align: 'center', required: true, type: 'text' },
{ text: '最大回差', value: 'maxReturnError', align: 'center', required: true, type: 'text' },
{ text: '回差（允许回差）', value: 'returnError', align: 'center', required: true, type: 'text' },
])
const columns_pressureSensor = ref([ // 压力传感器
{ text: '标准器示值', value: 'indicatingValue', align: 'center', required: true, type: 'text' },
{ text: '理论输出值', value: 'theoreticalOutputValue', align: 'center', required: true, type: 'text' },
{
text: '第一次',
value: 'firstStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'firstForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'firstReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{
text: '第二次',
value: 'secondStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'secondForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'secondReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{
text: '第三次',
value: 'thirdStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'thirdForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'thirdReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{ text: '正行程平均值', value: 'averageForwardStroke', align: 'center', required: true, type: 'text' },
{ text: '反行程平均值', value: 'averageReverseStroke', align: 'center', required: true, type: 'text' },
{ text: '平均值', value: 'averageValue', align: 'center', required: true, type: 'text' },
{ text: '回差平均值ΔyHi', value: 'averageReturnError', align: 'center', required: true, type: 'text' },
])
// 电接点一般压力表设定点偏差及切换差表格
const columns_electricContact = ref([
{ text: '标准器示值', value: 'indicatingValue', align: 'center', required: true, width: '120' },
{ text: '正行程切换值', value: 'forwardStrokeSwitchValue', align: 'center', required: true, width: '120' },
{ text: '反行程切换值', value: 'reverseStrokeSwitchValue', align: 'center', required: true, width: '120' },
{ text: '设定点偏差', value: 'pointDeviation', align: 'center', required: false, width: '120' },
{ text: '切换差', value: 'differentGap', align: 'center', required: false, width: '120' },
])
// 电接点一般压力表设定点偏差及切换差表格--结果表格
const result_columns_electricContact = ref([
{ text: '最大设定点偏差绝对值', value: 'maxPointDeviation', align: 'center', required: true, width: '120' },
{ text: '允许设定点偏差绝对值', value: 'allowPointDeviation', align: 'center', required: true, width: '120' },
{ text: '最大切换差', value: 'maxDifferentGap', align: 'center', required: true, width: '120' },
{ text: '允许切换差', value: 'allowDifferentGap', align: 'center', required: true, width: '120' },
])
const columns_digitalPressureGauge = ref([ // 数字压力计
{ text: '标准器示值', value: 'indicatingValue', align: 'center', required: true, type: 'text' },
{
text: '第一次',
value: 'firstStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'firstForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'firstReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{
text: '第二次',
value: 'secondStroke',
align: 'center',
required: true,
width: '180',
children: [
{ text: '正行程', value: 'secondForwardStroke', align: 'center', required: true, type: 'inputNumber' },
{ text: '反行程', value: 'secondReverseStroke', align: 'center', required: true, type: 'inputNumber' },
],
},
{ text: '示值误差', value: 'indicatingError', align: 'center', required: true, type: 'text' },
{ text: '正行程平均值', value: 'averageForwardStroke', align: 'center', required: true, type: 'text' },
{ text: '反行程平均值', value: 'averageReverseStroke', align: 'center', required: true, type: 'text' },
{ text: '回程误差', value: 'returnError', align: 'center', required: true, type: 'text' },
])
const columns_zeroDriftResult = ref([ // 零位飘逸表头
{ text: 'min', value: 'min', align: 'center', required: true },
{ text: '0', value: 'zeroDriftOne', align: 'center', required: true },
{ text: '15', value: 'zeroDriftTwo', align: 'center', required: true },
{ text: '30', value: 'zeroDriftThree', align: 'center', required: true },
{ text: '45', value: 'zeroDriftFour', align: 'center', required: true },
{ text: '60', value: 'zeroDriftFive', align: 'center', required: true },
])
const zeroDriftResultList = ref([]) as any // 数字压力计零位漂移表格
// 数字压力计结果表格
const result_columns_digitalPressureGauge = ref([
{ text: '示值误差允许值', value: 'indicatingError', align: 'center', required: true, type: 'text' },
{ text: '示值误差最大值', value: 'maxIndicatingError', align: 'center', required: true, type: 'text' },
{ text: '回程误差允许值', value: 'returnError', align: 'center', required: true, type: 'text' },
{ text: '回程误差最大值', value: 'maxReturnError', align: 'center', required: true, type: 'text' },
])
// -------------------------------------------获取详情信息--------------------------------------------------
// 获取页面详情信息
const fetchInfo = async () => {
const loading = ElLoading.service({
lock: true,
background: 'rgba(255, 255, 255, 0.8)',
})
const res = await getInfo({
id: infoId.value,
belongStandardEquipment: itemFormData.value.belongStandardEquipment,
// 我的任务跳转过来如果已经配置过检定项了，到编辑页面，且用一下三个字段替代传id请求详情
itemId: $route.query.itemId, // 检定项id
orderId: $route.query.orderId, // 任务单id
sampleId: $route.query.sampleId, // 被检设备id
})
// 有关于检定项的数据
itemFormData.value.itemId = res.data.itemId // 检定项id
itemFormData.value.itemCategoryName = res.data.itemCategoryName // 设备检定项分类名称
itemFormData.value.itemCategoryId = res.data.itemCategoryId ? res.data.itemCategoryId : itemFormData.value.itemCategoryId // 设备检定项分类名称id
itemFormData.value.appearance = `${res.data.appearance}` // 外观（1/0）
itemFormData.value.appearanceRemark = res.data.appearanceRemark // 外观备注说明
itemFormData.value.pointerDeflectionStability = `${res.data.pointerDeflectionStability}` // 指针偏转平稳性
itemFormData.value.pointerDeflectionStabilityRemark = res.data.pointerDeflectionStabilityRemark // 指针偏转平稳性备注说明
itemFormData.value.tightness = `${res.data.tightness}` // 密封性
itemFormData.value.tightnessRemark = res.data.tightnessRemark // 密封性备注说明
itemFormData.value.zeroDriftResult = res.data.zeroDriftResult // 零位飘移结果（合格/不合格，直接存文字）
itemFormData.value.insulationResistance = `${res.data.insulationResistance}`// 绝缘电阻
itemFormData.value.insulationResistanceRemark = res.data.insulationResistanceRemark // 绝缘电阻备注说明-0.02活塞式压力计
itemFormData.value.remark = res.data.remark // 备注
// =======================================表单公共组件数据处理=======================================================
useSolveFormData(res, templateFormAndTableRef.value)
// ==================================检定数据========================================================================
const responseList = res.data.measureDataPistonGaugeList.map((item: IDetailMeasureList) => {
return {
...item,
editable: pageType.value !== 'detail',
}
}) // 检定数据
if (itemFormData.value.itemCategoryName === '电接点一般压力表') {
list.value = responseList.filter((item: { dataCategory: string; dataType: string }) => item.dataType !== '2')
listElectricContact.value = responseList.filter((item: { dataCategory: string; dataType: string }) => item.dataType === '2')
}
else {
list.value = responseList
if (itemFormData.value.itemCategoryName === '数字压力计') {
zeroDriftResultList.value.push({
min: '示值',
zeroDriftFive: responseList[0].zeroDriftFive,
zeroDriftFour: responseList[0].zeroDriftFour,
zeroDriftOne: responseList[0].zeroDriftOne,
zeroDriftThree: responseList[0].zeroDriftThree,
zeroDriftTwo: responseList[0].zeroDriftTwo,
})
}
}
console.log(listElectricContact.value)
infoId.value = res.data.id
emits('giveInfoId', infoId.value)
loading.close()
}
// 初始化输入数据
const initInputData = (data: any) => {
if (itemFormData.value.itemCategoryName === '一般压力表' || itemFormData.value.itemCategoryName === '精密压力表') {
list.value = data.map((item: IDetailMeasureList) => {
return {
id: '',
afterFrictionForwardStroke: item.indicatingValue, // 轻敲后被检设备示值-正行程
afterFrictionReverseStroke: item.indicatingValue, // 轻敲后被检设备示值-反行程
beforeFrictionForwardStroke: item.indicatingValue, // 轻敲前被检设备示值-正行程
beforeFrictionReverseStroke: item.indicatingValue, // 轻敲前被检设备示值-反行程
indicatingValue: item.indicatingValue, // 标准器示值
variationForwardStroke: 0, // 轻敲前后变动量-正行程 公式：轻敲后（正行程）-轻敲前（正行程）所以初始的时候为0
variationReverseStroke: 0, // 轻敲前后变动量-反行程 公式：轻敲后（反行程）-轻敲前（反行程）
editable: pageType.value !== 'detail',
indicatingError: item.indicatingError, // 示值误差
returnError: item.returnError, // 回程误差、回程误差允许值
frictionError: item.frictionError, // 轻敲位移允许值
}
}) // 检定项表格
}
else if (itemFormData.value.itemCategoryName === '电接点一般压力表') {
list.value = data.map((item: IDetailMeasureList) => {
return {
id: '',
afterFrictionForwardStroke: item.indicatingValue, // 轻敲后被检设备示值-正行程
afterFrictionReverseStroke: item.indicatingValue, // 轻敲后被检设备示值-反行程
beforeFrictionForwardStroke: item.indicatingValue, // 轻敲前被检设备示值-正行程
beforeFrictionReverseStroke: item.indicatingValue, // 轻敲前被检设备示值-反行程
indicatingValue: item.indicatingValue, // 标准器示值
variationForwardStroke: 0, // 轻敲前后变动量-正行程 公式：轻敲后（正行程）-轻敲前（正行程）所以初始的时候为0
variationReverseStroke: 0, // 轻敲前后变动量-反行程 公式：轻敲后（反行程）-轻敲前（反行程）
editable: pageType.value !== 'detail',
indicatingError: item.indicatingError, // 示值误差
returnError: item.returnError, // 回程误差、回程误差允许值
frictionError: item.frictionError, // 轻敲位移允许值
forwardStrokeSwitchValue: 0, // 正行程切换值
reverseStrokeSwitchValue: 0, // 反行程切换值
}
}) // 检定项表格
listElectricContact.value = list.value
}
else if (itemFormData.value.itemCategoryName === '压力变送器' || itemFormData.value.itemCategoryName === '压力传感器') {
list.value = data.map((item: IDetailMeasureList) => {
return {
id: '',
indicatingValue: item.indicatingValue, // 标准器示值
theoreticalOutputValue: item.theoreticalOutputValue, // 理论输出值
firstForwardStroke: '', // 第一次正行程
firstReverseStroke: '', // 第一次反行程
secondForwardStroke: '', // 第二次正行程
secondReverseStroke: '', // 第二次反行程
thirdForwardStroke: '', // 第三次正行程
thirdReverseStroke: '', // 第三次反行程
indicatingError: '', // 示值误差
returnError: '', // 回程误差
editable: pageType.value !== 'detail',
}
}) // 检定项表格
}
else if (itemFormData.value.itemCategoryName === '数字压力计') {
zeroDriftResultList.value = [{
min: data.length ? data[0].indicatingValue : '', // 标准器示值
zeroDriftOne: '', // 0
zeroDriftTwo: '', // 15
zeroDriftThree: '', // 30
zeroDriftFour: '', // 45
zeroDriftFive: '', // 60
}]
list.value = data.map((item: IDetailMeasureList) => {
return {
id: '',
indicatingValue: item.indicatingValue, // 标准器示值
firstForwardStroke: '', // 第一次正行程
firstReverseStroke: '', // 第一次反行程
secondForwardStroke: '', // 第二次正行程
secondReverseStroke: '', // 第二次反行程
thirdForwardStroke: '', // 第三次正行程
thirdReverseStroke: '', // 第三次反行程
maxIndicatingError: '', // 示值误差最大值
averageForwardStroke: '', // 正行程平均值
averageReverseStroke: '', // 反行程平均值
maxReturnError: '', // 回程误差最大值
editable: pageType.value !== 'detail',
}
}) // 检定项表格
}
}
/**
* 新增的时候获取检定项输入数据(获取检定项分类详情)
* @param itemId 检定项id
* @param itemCategoryName 检定项分类名字
* @param belongStandardEquipment 检校标准装置字典
*/
const fetchItemInfo = async (itemId: string, itemCategoryName: string, belongStandardEquipment = '', solveList = '') => {
const params = {
id: itemId,
itemCategoryName, // 检定项分类名字
belongStandardEquipment, // 检校标准装置字典code
}
const res = await getItemInfo(params)
measureItemConfigPistonGauge.value = res.data.measureItemConfigPistonGauge // 输入配置
itemFormData.value.pointerDeflectionStability = res.data.measureItemConfigPistonGauge.pointerDeflectionStability ? '1' : '' // 指针偏转平稳性
itemFormData.value.tightness = res.data.measureItemConfigPistonGauge.tightness ? '1' : '' // 密封性
itemFormData.value.insulationResistance = res.data.measureItemConfigPistonGauge.insulationResistance ? '1' : '' // 绝缘电阻
itemFormData.value.insulationResistance = res.data.measureItemConfigPistonGauge.insulationResistance ? '1' : '' // 绝缘电阻
itemFormData.value.appearance = res.data.measureItemConfigPistonGauge.appearance ? '1' : '' // 外观及功能检查 1有外观，2没有外观
itemFormData.value.supplyVoltage = res.data.measureItemConfigPistonGauge.supplyVoltage // 供电电压
if (solveList !== 'notNeedList') {
initInputData(res.data.measureItemDataPistonGaugeList)
}
inputList.value = res.data.measureItemDataPistonGaugeList.map((item: { is90Upper: number; indicatingError: string }) => {
return {
...item,
// 是否是量程上线90%以上：（量程上限 - 量程下限）* 90% < 示值误差允许值
is90Upper: calc(Number(calc(measureItemConfigPistonGauge.value.rangeUpper, measureItemConfigPistonGauge.value.rangeLower, '-')), 0.9, '*') > Number(item.indicatingError.slice(1)),
}
}) // 记录配置项
itemFormData.value.cycleNumber = res.data.measureItemConfigPistonGauge.cycleNumber // 循环次数
}
// ----------------------------------------点击保存时校验---------------------------------------
// 校验
const checkout = () => {
if (`${itemFormData.value.appearance}` === '0' && !itemFormData.value.appearanceRemark) { // 不合格需要验证外观说明
ElMessage.warning('外观备注说明不能为空')
}
if (!list.value.length) {
ElMessage.warning('示值误差、回程误差、轻敲位移不能为空')
return false
}
if (!resultList.value) {
ElMessage.warning('结果不能为空，请点击生成结果处理')
return false
}
if (itemFormData.value.itemCategoryName === '电接点一般压力表') {
if (!listElectricContact.value.length) {
ElMessage.warning('设定点偏差及切换差不能为空')
return false
}
if (!resultListElectricContact.value) {
ElMessage.warning('设定点偏差及切换差 结果 不能为空，请点击生成结果处理')
return false
}
}
if (itemFormData.value.itemCategoryName === '数字压力计') {
if (!useCheckList(zeroDriftResultList.value, columns_zeroDriftResult.value, '零位漂移')) {
return false
}
}
return true
}
// -----------------------------------------生成结果处理----------------------------------------
// 处理结果表格--一般压力表
const solveResultData = () => {
if (!resultList.value.length) { return resultList.value }
const rangeUpperList = resultList.value.filter((item: IDetailMeasureList) => item.item === '量程上限90%以上')
const rangeLowerList = resultList.value.filter((item: IDetailMeasureList) => item.item === '量程上限90%以下')
const inputUpperList = inputList.value.filter((item: { is90Upper: boolean }) => item.is90Upper === true)
const inputLowerList = inputList.value.filter((item: { is90Upper: boolean }) => item.is90Upper === false)
if (rangeUpperList.length && inputUpperList.length) { // 量程上线90%以上
resultList.value = resultList.value.map((item: IDetailMeasureList) => {
if (item.item === '量程上限90%以上') {
item.indicatingError = inputUpperList[0].indicatingError // 示值误差
item.returnError = inputUpperList[0].returnError // 回程误差、回程误差允许值
item.frictionError = inputUpperList[0].frictionError // 轻敲位移允许值
}
return item
}) // 检定数据
}
if (rangeLowerList.length && inputLowerList.length) { // 量程上线90%以下
resultList.value = resultList.value.map((item: IDetailMeasureList) => {
if (item.item === '量程上限90%以下') {
item.indicatingError = inputLowerList[0].indicatingError // 示值误差
item.returnError = inputLowerList[0].returnError // 回程误差、回程误差允许值
item.frictionError = inputLowerList[0].frictionError // 轻敲位移允许值
}
return item
}) // 检定数据
}
}
/**
* 点击生成结果处理
* @param type bottomTable下面表格的计算结果
* dataCategoryParam 检定数据类别(1检定数据，2计算结果表数据(对应取注释带(结果表)的数据))
*/
const createResult = (type = '') => {
if (type !== 'bottomTable' && !list.value.length) {
ElMessage.warning('没有 示值误差、回程误差、轻敲位移 检定项数据，无法生成结果')
return false
}
// ======================在这里要校验上面表格不能的字段不能为空===========
// ===================================================================
// ==================================================================
// if (!useCheckList(list.value, measureColumns.value, '检定数据')) {
// return false
// }
// 校验数字压力计零位漂移
if (itemFormData.value.itemCategoryName === '数字压力计') {
if (!useCheckList(zeroDriftResultList.value, columns_zeroDriftResult.value, '零位漂移')) {
return false
}
else {
// 计算零位漂移结果：零位漂移合格判断依据：min0为示值基础值，min15、30、45、60的示值与mn0进行差值对比，差值小于等于最大允许误差绝对值（回程误差允许值：为最大允许误差绝对值（不带±））的1/2为合格
itemFormData.value.zeroDriftResult = useZeroDriftResult(zeroDriftResultList.value[0].zeroDriftOne, zeroDriftResultList.value[0].zeroDriftTwo, zeroDriftResultList.value[0].zeroDriftThree, zeroDriftResultList.value[0].zeroDriftFour, zeroDriftResultList.value[0].zeroDriftFive, inputList.value[0].returnError)
}
}
if (type === 'bottomTable') {
if (!listElectricContact.value.length) {
ElMessage.warning('没有 设定点偏差及切换差 检定项数据，无法生成结果')
return false
}
console.log(listElectricContact.value)
if (!useCheckList(listElectricContact.value, columns_electricContact.value, '设定点偏差及切换差')) {
return false
}
}
// ===========================loading处理===========================================
tableLoadingTop.value = itemFormData.value.itemCategoryName !== '电接点一般压力表'
if (itemFormData.value.itemCategoryName === '压力传感器' || itemFormData.value.itemCategoryName === '压力变送器' || itemFormData.value.itemCategoryName === '数字压力计') {
pressureSensorTableLoading.value = true
}
// 电接点一般压力表区分上下结果表格loading
else if (itemFormData.value.itemCategoryName === '电接点一般压力表') {
if (type === 'bottomTable') { // 下面表格的计算
tableLoadingBottom.value = true
}
else { // 上面表格计算
tableLoadingTop.value = true
}
}
// =================================================================================
let tempMeasureDataPistonGaugeList = list.value.map((item) => {
return {
...item,
workLineEquation: itemFormData.value.workLineEquation, // 工作直线方程（压力传感器）
dataType: '1', // 电接点一般压力表计算上面表格字段
}
}) as any
if (type === 'bottomTable') {
tempMeasureDataPistonGaugeList = listElectricContact.value.map((item) => {
return {
...item,
dataType: '2', // 电接点一般压力表计算下面表格字段
}
})
}
const params = {
belongStandardEquipment: itemFormData.value.belongStandardEquipment, // 检校标准装置
itemCategoryName: itemFormData.value.itemCategoryName, // 检定项分类名称
measureDataPistonGaugeList: tempMeasureDataPistonGaugeList,
measureItemConfigPistonGauge: measureItemConfigPistonGauge.value, // 输入配置
}
calculateHandle(params).then((res) => {
if (res.data && res.data.length) {
if (itemFormData.value.itemCategoryName === '一般压力表' || itemFormData.value.itemCategoryName === '精密压力表' || itemFormData.value.itemCategoryName === '电接点一般压力表') {
if (type !== 'bottomTable') { // 电接点一般压力表的第二表格计算不去处理第一表格的数据
const responseList = res.data.filter((item: { dataCategory: string }) => item.dataCategory === '2')
resultList.value = responseList
}
if (itemFormData.value.itemCategoryName === '一般压力表') {
// 处理量程上限90%以上、量程上限90%以上以下的数据
solveResultData()
}
else if (itemFormData.value.itemCategoryName === '精密压力表') {
resultList.value = resultList.value.map((item: IDetailMeasureList) => {
item.indicatingError = inputList.value[0].indicatingError // 示值误差
item.returnError = inputList.value[0].returnError // 回程误差、回程误差允许值
item.frictionError = inputList.value[0].frictionError // 轻敲位移允许值
return item
}) // 检定数据
}
else if (itemFormData.value.itemCategoryName === '电接点一般压力表') {
if (type === 'bottomTable') { // 下面表格计算
listElectricContact.value = res.data.filter((item: { dataCategory: string }) => item.dataCategory !== '2')
listElectricContact.value = listElectricContact.value.map((item) => {
return {
...item,
editable: pageType.value !== 'detail',
}
})
resultListElectricContact.value = res.data.filter((item: { dataCategory: string }) => item.dataCategory === '2')
// 找到输入配置量程90以下数据
const inputLowerList = inputList.value.filter((item: { is90Upper: boolean }) => item.is90Upper === false)
resultListElectricContact.value = resultListElectricContact.value.map((item: IDetailMeasureList) => {
if (inputLowerList.length) {
item.indicatingError = inputLowerList[0].indicatingError // 示值误差
item.returnError = inputLowerList[0].returnError // 回程误差、回程误差允许值
}
return item
}) // 检定数据
// =====================电接点一般压力第二结果判断===========
const result = resultListElectricContact.value.every((item: any) => {
return Number(item.maxPointDeviation) <= Number(item.allowPointDeviation)
&& Number(item.maxDifferentGap) <= Number(item.allowDifferentGap)
})
itemFormData.value.otherOutcome = result ? '合格' : '不合格' // 第二结果
}
else { // 上面表格计算
// 处理量程上限90%以上、量程上限90%以上以下的数据
solveResultData()
}
}
// ==================第一结果判断====================
// 判断结果：示值误差最大值、轻敲位移最大值、回程误差最大值均在允许值内，则合格，否则不合格。
const result = resultList.value.every((item) => {
return Number(item.maxIndicatingError) <= Number(item.indicatingError!.slice(1))
&& Number(item.maxFrictionError) <= Number(item.frictionError)
&& Number(item.maxReturnError) <= Number(item.returnError)
})
itemFormData.value.outcome = result ? '合格' : '不合格'
}
else if (itemFormData.value.itemCategoryName === '压力变送器') {
list.value = res.data.filter((item: { dataCategory: string }) => item.dataCategory !== '2')
list.value = list.value.map((item) => {
return {
...item,
editable: pageType.value !== 'detail',
}
})
const responseList = res.data.filter((item: { dataCategory: string }) => item.dataCategory === '2')
resultList.value = responseList
resultList.value = resultList.value.map((item: IDetailMeasureList) => {
item.indicatingError = inputList.value[0].indicatingError // 示值误差
item.returnError = inputList.value[0].returnError // 回程误差、回程误差允许值
return item
}) // 检定数据
// 判断结果：示值误差最大值、回程误差最大值均在允许值内，则合格，否则不合格。
const result = resultList.value.every((item) => {
return Number(item.maxIndicatingError) <= Number(item.indicatingError!.slice(1))
&& Number(item.maxReturnError) <= Number(item.returnError)
})
itemFormData.value.outcome = result ? '合格' : '不合格'
}
else if (itemFormData.value.itemCategoryName === '压力传感器') {
const responseList = res.data.filter((item: { dataCategory: string }) => `${item.dataCategory}` !== '2')
list.value = responseList.map((item: { editable: boolean }) => {
return {
...item,
editable: pageType.value !== 'detail',
}
})
const resFormData = res.data.filter((item: { dataCategory: string }) => `${item.dataCategory}` === '2')
if (resFormData.length) {
itemFormData.value.interceptA = resFormData[0].interceptA // 截距a
itemFormData.value.slopeB = resFormData[0].slopeB // 斜率b
itemFormData.value.sensitivityB = resFormData[0].sensitivityB // 灵敏度b
itemFormData.value.repeatabilityR = resFormData[0].repeatabilityR // 重复性ξR
itemFormData.value.hysteresisH = resFormData[0].hysteresisH // 迟滞ξH
itemFormData.value.linearL = resFormData[0].linearL // 线性ξL
itemFormData.value.basicErrorA = resFormData[0].basicErrorA // 基本误差A
itemFormData.value.periodicStabilitySB = resFormData[0].periodicStabilitySB // 周期稳定性Sb
}
}
else if (itemFormData.value.itemCategoryName === '数字压力计') {
const responseList = res.data.filter((item: { dataCategory: string }) => `${item.dataCategory}` !== '2')
list.value = responseList.map((item: { editable: boolean }) => {
return {
...item,
editable: pageType.value !== 'detail',
}
})
const responseResultList = res.data.filter((item: { dataCategory: string }) => `${item.dataCategory}` === '2')
resultList.value = responseResultList.map((item: IDetailMeasureList) => {
item.indicatingError = inputList.value[0].indicatingError // 示值误差
item.returnError = inputList.value[0].returnError // 回程误差、回程误差允许值
return item
}) // 检定数据
// 判断结果：示值误差最大值、回程误差最大值均在允许值内，则合格，否则不合格。
const result = resultList.value.every((item) => {
return Number(item.maxIndicatingError) <= Number(item.indicatingError!.slice(1))
&& Number(item.maxReturnError) <= Number(item.returnError)
})
itemFormData.value.outcome = result ? '合格' : '不合格'
}
}
else {
list.value = res.data
}
tableLoadingTop.value = false
pressureSensorTableLoading.value = false
tableLoadingBottom.value = false
}).catch(() => {
tableLoadingTop.value = false
pressureSensorTableLoading.value = false
tableLoadingBottom.value = false
})
}
// -------------------------------------------处理表格函数---------------------------------------
// el-input-number组件值变化
const handleInputNumberChange = ({ row }: any) => {
if (itemFormData.value.itemCategoryName === '一般压力表' || itemFormData.value.itemCategoryName === '精密压力表' || itemFormData.value.itemCategoryName === '电接点一般压力表') {
row.variationForwardStroke = calc(row.afterFrictionForwardStroke, row.beforeFrictionForwardStroke, '-') // 轻敲前后变动量-正行程 公式：轻敲后（正行程）-轻敲前（正行程）所以初始的时候为0
row.variationReverseStroke = calc(row.afterFrictionReverseStroke, row.beforeFrictionReverseStroke, '-') // 轻敲前后变动量-正行程 公式：轻敲后（正行程）-轻敲前（正行程）所以初始的时候为0
}
}
// 压力变送器复制
const copy = () => {
console.log('点击复制')
list.value = list.value.map((item: IDetailMeasureList) => {
return {
...item,
indicatingValue: item.indicatingValue, // 标准器示值
theoreticalOutputValue: item.theoreticalOutputValue, // 理论输出值
firstForwardStroke: item.firstForwardStroke, // 第一次正行程
firstReverseStroke: item.firstReverseStroke, // 第一次反行程
secondForwardStroke: item.firstForwardStroke, // 第二次正行程
secondReverseStroke: item.firstReverseStroke, // 第二次反行程
thirdForwardStroke: item.firstForwardStroke, // 第三次正行程
thirdReverseStroke: item.firstReverseStroke, // 第三次反行程
indicatingError: '', // 示值误差
returnError: '', // 回程误差
editable: pageType.value !== 'detail',
}
}) // 检定项表格
}
// -------------------------------------压力传感器--------------------------------------------------
// 获取上一周期灵敏度
const fetchSlopeB = () => {
getSlopeB({ eqptEquipmentId: eqptEquipmentId.value }).then((res) => {
itemFormData.value.lastCycleSensitivity = res.data || '/' // 上一周期灵敏度b0
})
}
// ------------------------------------------钩子----------------------------------------------
watch(() => itemFormData.value.itemCategoryName, (newValue) => {
console.log(newValue, 'itemCategoryName.value')
if (newValue) {
switch (newValue) {
case '一般压力表':
measureColumns.value = columns_generalPurposegauge.value
break
case '精密压力表':
measureColumns.value = columns_generalPurposegauge.value
break
case '电接点一般压力表':
measureColumns.value = columns_generalPurposegauge.value
break
case '压力变送器':
if (itemFormData.value.cycleNumber === 1) {
measureColumns.value = columns_digitalMultimeterTable.value.filter((item, index) => index !== 3 && index !== 4)
}
else if (itemFormData.value.cycleNumber === 2) {
measureColumns.value = columns_digitalMultimeterTable.value.filter((item, index) => index !== 4)
}
else {
measureColumns.value = columns_digitalMultimeterTable.value
}
break
case '压力传感器':
if (itemFormData.value.cycleNumber === 1) {
measureColumns.value = columns_pressureSensor.value.filter((item, index) => index !== 3 && index !== 4)
}
else if (itemFormData.value.cycleNumber === 2) {
measureColumns.value = columns_pressureSensor.value.filter((item, index) => index !== 4)
}
else {
measureColumns.value = columns_pressureSensor.value
}
break
case '数字压力计':
measureColumns.value = columns_digitalPressureGauge.value
break
default:
break
}
}
}, { immediate: true, deep: true })
watch(() => props.infoId, (newValue) => {
if (newValue) {
infoId.value = newValue
if (pageType.value === 'detail' && itemFormData.value.belongStandardEquipment) {
fetchInfo()
}
}
}, { immediate: true })
onMounted(() => {
eqptEquipmentId.value = $route.query.sampleId as string // 受检设备id
itemFormData.value.itemCategoryName = $route.query.itemCategoryName as string// 设备检定项分类名称
itemFormData.value.itemCategoryId = $route.query.itemCategoryId as string// 设备检定项分类名称id
itemFormData.value.belongStandardEquipment = $route.query.belongStandardEquipment as string// 标准装置code
itemFormData.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string// 标准装置名称
if (pageType.value === 'add') { // 从我的任务跳转过来（新增）
itemFormData.value.itemId = $route.query.itemId as string// 检定项id
// 查输入值(查检定项管理的详情)
fetchItemInfo($route.query.itemId! as string, $route.query.itemCategoryName! as string, $route.query.belongStandardEquipment as string)
}
else {
// 查输入值(查检定项管理的详情)
fetchItemInfo($route.query.itemId! as string, $route.query.itemCategoryName! as string, $route.query.belongStandardEquipment as string, 'notNeedList')
fetchInfo().then(() => {
createResult()
if (itemFormData.value.itemCategoryName === '电接点一般压力表') {
createResult('bottomTable')
}
}) // 获取页面详情信息
}
// 获取上一周期灵敏度b0
if (itemFormData.value.itemCategoryName === '压力传感器') {
fetchSlopeB()
}
})
// 监听页面类型
watch(() => pageType.value, (newValue) => {
console.log('页面类型', newValue)
list.value = list.value.map((item) => {
return {
...item,
editable: newValue !== 'detail',
}
})
})
defineExpose({ checkout, zeroDriftResultList, itemFormData, list, listElectricContact, templateFormAndTableRef, pageType })
</script>
<template>
<template-form-and-table ref="templateFormAndTableRef" :page-type="pageType" />
<!-- 标签 -->
<detail-block :title="pageType !== 'detail' ? '检定数据' : ''" :class="pageType === 'detail' ? 'setBottom' : ''">
<el-radio-group v-if="pageType === 'detail'" v-model="current">
<el-radio-button v-for="item in radioMenus" :key="item.value" :label="item.value">
{{ item.name }}
</el-radio-button>
</el-radio-group>
<!-- 表单 -->
<el-form
v-if="current === 'measure-data'"
ref="formRef"
:model="itemFormData"
label-width="120"
label-position="right"
style="margin-top: 20px;"
>
<el-row>
<!-- 外观 -->
<el-col :span="8">
<el-form-item label="外观:" prop="appearance">
<el-radio-group v-model="itemFormData.appearance" :disabled="pageType === 'detail'">
<el-radio label="1">
合格
</el-radio>
<el-radio label="0">
不合格
</el-radio>
</el-radio-group>
</el-form-item>
</el-col>
<el-col v-if="`${itemFormData.appearance}` === '0'" :span="12">
<el-form-item label="备注说明:" prop="appearanceRemark">
<el-input
v-model="itemFormData.appearanceRemark"
class="full-width-input"
:placeholder="pageType === 'detail' ? ' ' : '外观备注说明'"
autosize
type="textarea"
:disabled="pageType === 'detail'"
/>
</el-form-item>
</el-col>
<!-- 指针偏转平稳性 -->
<el-col v-if="itemFormData.pointerDeflectionStability" :span="8">
<el-form-item label="指针偏转平稳性:" prop="pointerDeflectionStability">
<el-radio-group v-model="itemFormData.pointerDeflectionStability" :disabled="pageType === 'detail'">
<el-radio label="1">
合格
</el-radio>
<el-radio label="0">
不合格
</el-radio>
</el-radio-group>
</el-form-item>
</el-col>
<el-col v-if="`${itemFormData.pointerDeflectionStability}` === '0'" :span="12">
<el-form-item label="备注说明:" prop="pointerDeflectionStabilityRemark">
<el-input
v-model="itemFormData.pointerDeflectionStabilityRemark"
class="full-width-input"
:placeholder="pageType === 'detail' ? ' ' : '指针偏转平稳性备注说明'"
autosize
type="textarea"
:disabled="pageType === 'detail'"
/>
</el-form-item>
</el-col>
<!-- 密封性 -->
<el-col v-if="itemFormData.tightness" :span="8">
<el-form-item label="密封性:" prop="tightness">
<el-radio-group v-model="itemFormData.tightness" :disabled="pageType === 'detail'">
<el-radio label="1">
合格
</el-radio>
<el-radio label="0">
不合格
</el-radio>
</el-radio-group>
</el-form-item>
</el-col>
<el-col v-if="`${itemFormData.tightness}` === '0'" :span="12">
<el-form-item label="备注说明:" prop="tightnessRemark">
<el-input
v-model="itemFormData.tightnessRemark"
class="full-width-input"
:placeholder="pageType === 'detail' ? ' ' : '密封性备注说明'"
autosize
type="textarea"
:disabled="pageType === 'detail'"
/>
</el-form-item>
</el-col>
<!-- 绝缘电阻 -->
<el-col v-if="itemFormData.insulationResistance" :span="8">
<el-form-item label="绝缘电阻:" prop="insulationResistance">
<el-radio-group v-model="itemFormData.insulationResistance" :disabled="pageType === 'detail'">
<el-radio label="1">
合格
</el-radio>
<el-radio label="0">
不合格
</el-radio>
</el-radio-group>
</el-form-item>
</el-col>
<el-col v-if="`${itemFormData.insulationResistance}` === '0'" :span="12">
<el-form-item label="备注说明:" prop="insulationResistanceRemark">
<el-input
v-model="itemFormData.insulationResistanceRemark"
class="full-width-input"
:placeholder="pageType === 'detail' ? ' ' : '绝缘电阻备注说明'"
autosize
type="textarea"
:disabled="pageType === 'detail'"
/>
</el-form-item>
</el-col>
</el-row>
<!-- =================数字压力计零位飘逸============================================= -->
<div v-if="current === 'measure-data' && itemFormData.itemCategoryName === '数字压力计'" style="width: 100%;display: flex;align-items: center;">
<div style="font-size: 14px;color: #606266;padding: 0 20px 20px 0;font-weight: 600;">
零位漂移:
</div>
<el-form
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '数字压力计'"
ref="formRef"
:model="itemFormData"
label-width="120"
label-position="right"
style="width: 520px;"
>
<el-row :gutter="24">
<el-col :span="12">
<el-form-item label="零位漂移结果:" prop="zeroDriftResult">
<el-input
v-model="itemFormData.zeroDriftResult"
class="full-width-input"
disabled
/>
</el-form-item>
</el-col>
</el-row>
</el-form>
</div>
<el-table
v-show="current === 'measure-data' && itemFormData.itemCategoryName === '数字压力计'"
ref="tableRef"
:data="zeroDriftResultList"
border
style="margin-bottom: 20px;"
>
<el-table-column align="center" label="序号" width="80" type="index" />
<el-table-column
v-for="item in columns_zeroDriftResult"
:key="item.value"
:prop="item.value"
:label="item.text"
align="center"
>
<template #header>
<span v-show="item.required" style="color: red;">*</span><span>{{ item.text }}</span>
</template>
<template v-if="pageType !== 'detail'" #default="scope">
<!-- 示值 -->
<el-input
v-if="item.value === 'zeroDriftOne' || item.value === 'zeroDriftTwo' || item.value === 'zeroDriftThree' || item.value === 'zeroDriftFour' || item.value === 'zeroDriftFive'"
v-model="scope.row[item.value]"
:placeholder="`${item.text}`"
class="input"
/>
</template>
</el-table-column>
</el-table>
</el-form>
<div v-if="current === 'measure-data'" style="display: flex;justify-content: space-between;">
<div v-if="itemFormData.itemCategoryName === '一般压力表' || itemFormData.itemCategoryName === '精密压力表' || itemFormData.itemCategoryName === '电接点一般压力表'" style="white-space: nowrap; font-size: 14px;color: #606266;padding: 0 20px 20px 0;font-weight: 600;">
示值误差、回程误差、轻敲位移:
</div>
<div v-if="itemFormData.itemCategoryName === '压力传感器'" style="white-space: nowrap; font-size: 14px;color: #606266;padding: 0 20px 20px 0;font-weight: 600;">
检定数据：
</div>
<div v-if="itemFormData.itemCategoryName === '数字压力计'" style="white-space: nowrap; font-size: 14px;color: #606266;padding: 0 20px 20px 0;font-weight: 600;">
示值误差：
</div>
<div v-if="itemFormData.itemCategoryName === '压力变送器'" style="font-size: 14px;color: #606266;padding: 0 20px;white-space: nowrap;">
<!-- 理论输出值的单位 -->
单位: （mA）
</div>
<div v-if="itemFormData.itemCategoryName !== '压力变送器'" style="white-space: nowrap; font-size: 14px;color: #606266;padding: 0 20px;">
<!-- 根据输入单位自动配置：量程的单位 -->
单位: {{ measureItemConfigPistonGauge ? measureItemConfigPistonGauge.rangeUnit : '' }}
</div>
<div style="width: 100%;display: flex;justify-content: flex-end;margin-bottom: 10px;">
<el-button v-if="pageType !== 'detail' && (itemFormData.itemCategoryName === '压力变送器' || itemFormData.itemCategoryName === '压力传感器')" type="primary" @click="copy">
复制
</el-button>
<el-button v-if="pageType !== 'detail'" type="primary" @click="createResult('')">
生成结果处理
</el-button>
</div>
</div>
<el-form
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '压力传感器'"
ref="formRef"
:model="itemFormData"
label-width="120"
label-position="right"
>
<el-row :gutter="24">
<el-col :span="12">
<el-form-item label="工作直线方程:" prop="workLineEquation">
<el-select
v-model="itemFormData.workLineEquation"
filterable
placeholder="请选择工作直线方程"
:disabled="pageType === 'detail'"
class="full-width-input"
>
<el-option v-for="item of workingLinearEquationList" :key="item.id" :label="item.name" :value="item.value" />
</el-select>
</el-form-item>
</el-col>
</el-row>
</el-form>
<!-- 有多级表头的表格（一般压力表、精密压力表、压力传感器、电接点一般压力表、数字压力计） -->
<multi-table
v-if="current === 'measure-data' && (itemFormData.itemCategoryName === '一般压力表' || itemFormData.itemCategoryName === '精密压力表' || itemFormData.itemCategoryName === '压力变送器' || itemFormData.itemCategoryName === '压力传感器' || itemFormData.itemCategoryName === '电接点一般压力表' || itemFormData.itemCategoryName === '数字压力计')"
v-loading="pressureSensorTableLoading"
:table-data="list"
:table-header="measureColumns"
:merge-rows="[]"
:need-index="true"
@handle-input-number-change="handleInputNumberChange"
/>
<!-- ==================================结果======================================================= -->
<!-- 一般压力表结果表格、电接点一般压力表 -->
<el-table
v-if="current === 'measure-data' && (itemFormData.itemCategoryName === '一般压力表' || itemFormData.itemCategoryName === '电接点一般压力表')"
ref="tableRef"
v-loading="tableLoadingTop"
:data="resultList"
border
style="width: 100%;margin-top: 20px;"
>
<el-table-column align="center" label="序号" width="80" type="index" />
<el-table-column
v-for="item in result_columns_generalPurposegauge"
:key="item.value"
:prop="item.value"
:label="item.text"
align="center"
/>
</el-table>
<!-- 精密压力表结果表格 -->
<el-table
v-if="current === 'measure-data' && (itemFormData.itemCategoryName === '精密压力表')"
ref="tableRef"
v-loading="tableLoadingTop"
:data="resultList"
border
style="width: 100%;margin-top: 20px;"
>
<el-table-column align="center" label="序号" width="80" type="index" />
<el-table-column
v-for="item in result_columns_precisionPressuregauge"
:key="item.value"
:prop="item.value"
:label="item.text"
align="center"
/>
</el-table>
<!-- 压力变送器结果表格 -->
<el-table
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '压力变送器'"
ref="tableRef"
v-loading="tableLoadingTop"
:data="resultList"
border
style="width: 100%;margin-top: 20px;"
>
<el-table-column align="center" label="序号" width="80" type="index" />
<el-table-column
v-for="item in result_columns_digitalMultimeterTable"
:key="item.value"
:prop="item.value"
:label="item.text"
align="center"
/>
</el-table>
<!-- 数字压力计结果表格 -->
<el-table
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '数字压力计'"
ref="tableRef"
v-loading="tableLoadingTop"
:data="resultList"
border
style="width: 100%;margin-top: 20px;"
>
<el-table-column align="center" label="序号" width="80" type="index" />
<el-table-column
v-for="item in result_columns_digitalPressureGauge"
:key="item.value"
:prop="item.value"
:label="item.text"
align="center"
/>
</el-table>
<!-- 结果、备注：第一结果 -->
<el-form
v-if="current === 'measure-data' && itemFormData.itemCategoryName !== '压力传感器'"
ref="formRef"
:model="itemFormData"
label-width="120"
label-position="right"
style="margin-top: 20px;"
>
<el-row :gutter="24">
<el-col :span="12">
<el-form-item label="结果:" prop="outcome">
<el-input
v-model="itemFormData.outcome"
class="full-width-input"
autosize
:placeholder="pageType === 'detail' ? ' ' : '请判断结果'"
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="12">
<el-form-item label="输出备注:" prop="remark">
<el-input
v-model="itemFormData.remark"
class="full-width-input"
:placeholder="pageType === 'detail' ? ' ' : '请填写输出备注'"
autosize
type="textarea"
:disabled="pageType === 'detail'"
/>
</el-form-item>
</el-col>
</el-row>
</el-form>
<!-- ========================================第二结果======================================== -->
<div v-if="current === 'measure-data' && itemFormData.itemCategoryName === '压力传感器'" style="margin-top: 20px;font-size: 14px;color: #606266;padding: 0 20px 20px 0;font-weight: 600;">
数据处理:
</div>
<!-- 压力传感器第二结果 -->
<el-form
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '压力传感器'"
ref="formRef"
:model="itemFormData"
label-width="120"
label-position="right"
style="margin-top: 20px;"
>
<el-row :gutter="24">
<el-col :span="6">
<el-form-item label="截距a:">
<el-input
v-model="itemFormData.interceptA"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="斜率b:">
<el-input
v-model="itemFormData.slopeB"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="灵敏度b:">
<el-input
v-model="itemFormData.sensitivityB"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="供电电压:">
<el-input
v-model="itemFormData.supplyVoltage"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="重复性ξR:">
<el-input
v-model="itemFormData.repeatabilityR"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="迟滞ξH:">
<el-input
v-model="itemFormData.hysteresisH"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="线性ξL:">
<el-input
v-model="itemFormData.linearL"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="基本误差A:">
<el-input
v-model="itemFormData.basicErrorA"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="上一周期灵敏度b0:">
<el-input
v-model="itemFormData.lastCycleSensitivity"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="6">
<el-form-item label="周期稳定性Sb:">
<el-input
v-model="itemFormData.periodicStabilitySB"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
</el-row>
<el-row :gutter="20">
<el-col :span="12">
<el-form-item label="结果:" prop="otherOutcome">
<el-input
v-if="itemFormData.itemCategoryName !== '压力传感器'"
v-model="itemFormData.otherOutcome"
class="full-width-input"
autosize
type="textarea"
disabled
/>
<el-select
v-if="itemFormData.itemCategoryName === '压力传感器'"
v-model="itemFormData.otherOutcome"
filterable
placeholder="请选择结果"
:disabled="pageType === 'detail'"
class="full-width-input"
>
<el-option v-for="item of ['合格', '不合格']" :key="item" :label="item" :value="item" />
</el-select>
</el-form-item>
</el-col>
<el-col :span="12">
<el-form-item label="输出备注:" prop="otherRemark">
<el-input
v-model="itemFormData.otherRemark"
class="full-width-input"
:placeholder="pageType === 'detail' ? ' ' : '请填写输出备注'"
autosize
type="textarea"
:disabled="pageType === 'detail'"
/>
</el-form-item>
</el-col>
</el-row>
</el-form>
<!-- ========================================电接点一般压力第二结果表格======================= -->
<!-- 电接点一般压力表第二结果 -->
<div v-if="current === 'measure-data' && itemFormData.itemCategoryName === '电接点一般压力表'" style="width: 100%;margin-top: 36px;display: flex;justify-content: space-between;align-items: center;">
<div style="font-size: 14px;color: #606266;padding: 0 20px 0 0;font-weight: 600;">
设定点偏差及切换差:
</div>
<el-button v-if="pageType !== 'detail'" type="primary" @click="createResult('bottomTable')">
生成结果处理
</el-button>
</div>
<!-- 电接点一般压力表 设定点偏差及切换差表格 -->
<el-table
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '电接点一般压力表'"
ref="tableRef"
v-loading="tableLoadingBottom"
:data="listElectricContact"
border
style="width: 100%;margin-top: 20px;"
>
<el-table-column align="center" label="序号" width="80" type="index" />
<el-table-column
v-for="item in columns_electricContact"
:key="item.value"
:prop="item.value"
:label="item.text"
align="center"
>
<template #header>
<span v-show="item.required" style="color: red;">*</span><span>{{ item.text }}</span>
</template>
<template #default="scope">
<!-- 正行程切换值、反行程切换值 -->
<el-input-number
v-if="pageType !== 'detail' && (item.value === 'forwardStrokeSwitchValue' || item.value === 'reverseStrokeSwitchValue')"
v-model="scope.row[item.value]"
:placeholder="pageType === 'detail' ? '' : '请输入'"
:disabled="pageType === 'detail'"
size="small"
/>
</template>
</el-table-column>
</el-table>
<el-table
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '电接点一般压力表'"
ref="tableRef"
v-loading="tableLoadingBottom"
:data="resultListElectricContact"
border
style="width: 100%;margin-top: 20px;"
>
<el-table-column align="center" label="序号" width="80" type="index" />
<el-table-column
v-for="item in result_columns_electricContact"
:key="item.value"
:prop="item.value"
:label="item.text"
align="center"
/>
</el-table>
<el-form
v-if="current === 'measure-data' && itemFormData.itemCategoryName === '电接点一般压力表'"
ref="formRef"
:model="itemFormData"
label-width="120"
label-position="right"
style="margin-top: 20px;"
>
<el-row :gutter="24">
<el-col :span="12">
<el-form-item label="结果:" prop="otherOutcome">
<el-input
v-model="itemFormData.otherOutcome"
class="full-width-input"
autosize
type="textarea"
disabled
/>
</el-form-item>
</el-col>
<el-col :span="12">
<el-form-item label="输出备注:" prop="otherRemark">
<el-input
v-model="itemFormData.otherRemark"
class="full-width-input"
:placeholder="pageType === 'detail' ? ' ' : '请填写输出备注'"
autosize
type="textarea"
:disabled="pageType === 'detail'"
/>
</el-form-item>
</el-col>
</el-row>
</el-form>
<!-- =============================================================================================== -->
<!-- 历史修改记录 -->
<change-record v-show="pageType === 'detail' && current === 'change-record'" :info-id="infoId" />
</detail-block>
</template>
<style lang="scss" scoped>
.setBottom {
padding-bottom: 20px;
}
</style>