diff --git a/src/views/equipement/standard/book/components/config/tenth/config.vue b/src/views/equipement/standard/book/components/config/tenth/config.vue
index 12224ad..5fc9d30 100644
--- a/src/views/equipement/standard/book/components/config/tenth/config.vue
+++ b/src/views/equipement/standard/book/components/config/tenth/config.vue
@@ -1,4 +1,4 @@
-<!-- 标准装置台账信息详情 配置核查项 第13套：示波器检定装置 -->
+<!-- 标准装置台账信息详情 配置核查项 第10套：信号发生器 -->
 <script name="StandardBookEquipmentConfig" lang="ts" setup>
 import { ElLoading, ElMessage, ElMessageBox } from 'element-plus'
 import type { IList } from './tenth-interface'
@@ -44,120 +44,131 @@
 }
 // -------------------------------------------核查项-----------------------------------------------
 const listFrequency = ref<IList[]>([]) // 频率
-const listPowerLevel = ref<IList[]>([]) // 功率电平
+const listPowerLevel = ref<IList[]>([]) // 功率
 const listRelativeLevel = ref<IList[]>([]) // 相对电平
 const listAMDepth = ref<IList[]>([]) // 调幅度
 const listFrequencyModulationDeviation = ref<IList[]>([]) // 调频频偏
 const listPhase = ref<IList[]>([]) // 调相相偏
-const listFrequencySpectrum = ref<IList[]>([]) // 频谱纯度
+const listFrequencySpectrum = ref<IList[]>([]) // 谐波
 
 const checkoutFrequencyList = ref<IList[]>([]) // 频率多选
-const checkoutPowerLevelList = ref<IList[]>([]) // 功率电平多选
+const checkoutPowerLevelList = ref<IList[]>([]) // 功率多选
 const checkoutRelativeLevelList = ref<IList[]>([]) // 相对电平多选
 const checkoutAMDepthList = ref<IList[]>([]) // 调幅度多选
 const checkoutfrequencyModulationDeviationList = ref<IList[]>([]) // 调频频偏多选
 const checkoutPhaseList = ref<IList[]>([]) // 调相相偏多选
-const checkoutFrequencySpectrumList = ref<IList[]>([]) // 频谱纯度多选
+const checkoutFrequencySpectrumList = ref<IList[]>([]) // 谐波多选
 
 const frequency = ref(true) // 是否显示频率
-const powerLevel = ref(true) // 功率电平
+const powerLevel = ref(true) // 功率
 const relativeLevel = ref(true) // 相对电平
 const AMDepth = ref(true) // 调幅度
 const frequencyModulationDeviation = ref(true) // 调频频偏
 const phase = ref(true) // 调相相偏
-const frequencySpectrum = ref(true) // 频谱纯度
+const frequencySpectrum = ref(true) // 谐波
 
 const columns_frequency = ref<TableColumn[]>([ // 频率
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
-const columns_powerLevel = ref<TableColumn[]>([ // 功率电平
+const columns_powerLevel = ref<TableColumn[]>([ // 功率
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '功率', value: 'resolution', align: 'center', required: true },
-  { text: '功率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '功率', value: 'power', align: 'center', required: true, width: '180' },
+  { text: '功率单位', value: 'powerUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_relativeLevel = ref<TableColumn[]>([ // 相对电平
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '相对电平', value: 'resolution', align: 'center', required: true },
-  { text: '相对电平单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '相对电平', value: 'relativeLevel', align: 'center', required: true, width: '180' },
+  { text: '相对电平单位', value: 'relativeLevelUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_AMDepth = ref<TableColumn[]>([ // 调幅度
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '调幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '调幅度', value: 'modulation', align: 'center', required: true, width: '180' },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '高通滤波', value: 'highPassFilter', align: 'center', required: true, width: '180' },
+  { text: '高通滤波单位', value: 'highPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '低通滤波', value: 'lowerPassFilter', align: 'center', required: true, width: '180' },
+  { text: '低通滤波单位', value: 'lowerPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '调制速率', value: 'modulationRate', align: 'center', required: true, width: '180' },
+  { text: '调制速率单位', value: 'modulationRateUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)/%', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_frequencyModulationDeviation = ref<TableColumn[]>([ // 调频频偏
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '调频频偏', value: 'resolution', align: 'center', required: true },
-  { text: '调频频偏单位', value: 'resolution', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '调频频偏', value: 'frequencyDeviation', align: 'center', required: true },
+  { text: '调频频偏单位', value: 'frequencyDeviationUnit', align: 'center', required: true },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '高通滤波', value: 'highPassFilter', align: 'center', required: true, width: '180' },
+  { text: '高通滤波单位', value: 'highPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '低通滤波', value: 'lowerPassFilter', align: 'center', required: true, width: '180' },
+  { text: '低通滤波单位', value: 'lowerPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '调制速率', value: 'modulationRate', align: 'center', required: true, width: '180' },
+  { text: '调制速率单位', value: 'modulationRateUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)/%', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_phase = ref<TableColumn[]>([ // 调相相偏
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '调相相偏', value: 'resolution', align: 'center', required: true },
-  { text: '调相相偏单位', value: 'resolution', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '调相相偏', value: 'phaseDeviation', align: 'center', required: true },
+  { text: '调相相偏单位', value: 'phaseDeviationUnit', align: 'center', required: true },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '高通滤波', value: 'highPassFilter', align: 'center', required: true, width: '180' },
+  { text: '高通滤波单位', value: 'highPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '低通滤波', value: 'lowerPassFilter', align: 'center', required: true, width: '180' },
+  { text: '低通滤波单位', value: 'lowerPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '调制速率', value: 'modulationRate', align: 'center', required: true, width: '180' },
+  { text: '调制速率单位', value: 'modulationRateUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)/%', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
-const columns_frequencySpectrum = ref<TableColumn[]>([ // 频谱纯度
+const columns_frequencySpectrum = ref<TableColumn[]>([ // 谐波
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: 'RBW', value: 'rbwValue', align: 'center', required: true, width: '180' },
+  { text: 'RBW单位', value: 'rbwValueUnit', align: 'center', required: true, width: '100' },
+  { text: 'VBW', value: 'vbwValue', align: 'center', required: true, width: '180' },
+  { text: 'VBW单位', value: 'vbwValueUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 // 多选
@@ -166,7 +177,7 @@
     case '频率':
       checkoutFrequencyList.value = e
       break
-    case '功率电平':
+    case '功率':
       checkoutPowerLevelList.value = e
       break
     case '相对电平':
@@ -181,15 +192,46 @@
     case '调相相偏':
       checkoutPhaseList.value = e
       break
-    case '频谱纯度':
+    case '谐波':
       checkoutFrequencySpectrumList.value = e
       break
   }
 }
 
 // 校验表格（点击保存的时候、增加行用）
-const checkList = (list: any, title: string) => {
-  // return useCheckList(list, columns.value, title)
+const checkList = (list: any, getTitle: string) => {
+  let title = ''
+  if (getTitle.slice(getTitle.length - 2) === '表格') {
+    title = getTitle.slice(0, getTitle.length - 2)
+  }
+  else {
+    title = getTitle
+  }
+  let columns
+  switch (title) {
+    case '频率':
+      columns = columns_frequency.value
+      break
+    case '功率':
+      columns = columns_powerLevel.value
+      break
+    case '相对电平':
+      columns = columns_relativeLevel.value
+      break
+    case '调幅度':
+      columns = columns_AMDepth.value
+      break
+    case '调频频偏':
+      columns = columns_frequencyModulationDeviation.value
+      break
+    case '调相相偏':
+      columns = columns_phase.value
+      break
+    case '谐波':
+      columns = columns_frequencySpectrum.value
+      break
+  }
+  return useCheckList(list, columns, `${title}表格`)
 }
 
 /**
@@ -198,53 +240,191 @@
  * @param title 操作的表格
  */
 const addRow = (list: IList[], title: string) => {
-  // if (checkList(list, `${title}表格`)) {
-  //   if (list.length) { // 增加行时默认上一行数据
-  //     list.push({
-  //       id: '',
-  //       checkPoint: list[list.length - 1].checkPoint, //	核查点(直接存字典value)
-  //       checkType: list[list.length - 1].checkType, //	核查类型
-  //       cycleNumber: list[list.length - 1].cycleNumber, //	循环次数
-  //       equipmentId: list[list.length - 1].equipmentId, //	配套设备id
-  //       itemCategoryId: list[list.length - 1].itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
-  //       params: list[list.length - 1].params, //	核查项目(直接存字典value)
-  //       remark: list[list.length - 1].remark, //	核查项备注(每个数据存储的核查项备注相同，前端取列表中一个即可)
-  //       resolution: list[list.length - 1].resolution, //		分辨力
-  //       testType: list[list.length - 1].testType, // 核查点类型(直接存字典value)
-  //       unit: list[list.length - 1].unit, //	单位(直接存字典value)
-  //       urel: list[list.length - 1].urel, //	测量标准相对扩展不确定度urel
-  //     })
-  //   }
-  //   else {
-  //     list.push({
-  //       checkPoint: '', //	核查点
-  //       checkType: '', //	核查类型(直接存字典value，多个逗号分隔)
-  //       cycleNumber: 6, //	循环次数
-  //       equipmentId: infoId.value, //	配套设备id
-  //       itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
-  //       params: '', //	核查项目(直接存字典value)
-  //       remark: '', //	核查项备注
-  //       resolution: 0.0001, //	分辨力
-  //       testType: title, //	核查点类型(直接存字典value)
-  //       unit: '', //	单位(直接存字典value)
-  //       urel: 0, //	测量标准相对扩展不确定度urel
-  //     })
-  //   }
-  // }
+  if (checkList(list, `${title}表格`)) {
+    if (list.length) { // 增加行时默认上一行数据
+      list.push({ ...list[list.length - 1] })
+    }
+    else {
+      switch (title) {
+        case '频率':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '功率':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            power: '', //	功率
+            powerUnit: 'dBm', // 功率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '相对电平':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            relativeLevel: '', //	相对电平
+            relativeLevelUnit: 'dBm', // 相对电平单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '调幅度':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            modulation: '', // 调幅度
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            highPassFilter: '50', //	高通滤波
+            highPassFilterUnit: 'Hz', //	高通滤波单位
+            lowerPassFilter: '3', //	低通滤波
+            lowerPassFilterUnit: 'kHz', //	低通滤波单位
+            modulationRate: '', //	调制速率
+            modulationRateUnit: 'Hz', //	调制速率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '调频频偏':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            frequencyDeviation: '', //	调频频偏
+            frequencyDeviationUnit: 'MHz', // 调频频偏单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            highPassFilter: '50', //	高通滤波
+            highPassFilterUnit: 'Hz', //	高通滤波单位
+            lowerPassFilter: '3', //	低通滤波
+            lowerPassFilterUnit: 'kHz', //	低通滤波单位
+            modulationRate: '', //	调制速率
+            modulationRateUnit: 'Hz', //	调制速率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '调相相偏':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            phaseDeviation: '', //	调相相偏
+            phaseDeviationUnit: 'rad', // 调相相偏单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            highPassFilter: '50', //	高通滤波
+            highPassFilterUnit: 'Hz', //	高通滤波单位
+            lowerPassFilter: '3', //	低通滤波
+            lowerPassFilterUnit: 'kHz', //	低通滤波单位
+            modulationRate: '', //	调制速率
+            modulationRateUnit: 'Hz', //	调制速率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '谐波':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            rbwValue: '1', //	RBW
+            rbwValueUnit: 'kHz', //	RBW单位
+            vbwValue: '1', //	VBW
+            vbwValueUnit: 'kHz', //	VBW单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+      }
+    }
+  }
 }
+
 /**
  * 删除行公共方法
  * @param checkoutList 选中的数组
  * @param list 操作的数组
  */
-const delRow = (checkoutList: IList[], list: IList[]) => {
+const delRow = (checkoutList: IList[], list: IList[], title: string) => {
   if (!checkoutList.length) {
     ElMessage.warning('请选中要删除的行')
   }
   else {
-    list = list.filter((item: any) => {
-      return !checkoutList.includes(item)
-    })
+    let data = [] as any[]
+    data = differenceArray(list, checkoutList)
+    switch (title) {
+      case '频率':
+        listFrequency.value = data
+        break
+      case '功率':
+        listPowerLevel.value = data
+        break
+      case '相对电平':
+        listRelativeLevel.value = data
+        break
+      case '调幅度':
+        listAMDepth.value = data
+        break
+      case '调频频偏':
+        listFrequencyModulationDeviation.value = data
+        break
+      case '调相相偏':
+        listPhase.value = data
+        break
+      case '谐波':
+        listFrequencySpectrum.value = data
+        break
+    }
   }
 }
 
@@ -266,58 +446,200 @@
   )
     .then(() => {
       listFrequency.value = [] // 频率
-      listPowerLevel.value = [] // 功率电平
+      listPowerLevel.value = [] // 功率
       listRelativeLevel.value = [] // 相对电平
       listAMDepth.value = [] // 调幅度
       listFrequencyModulationDeviation.value = [] // 调频频偏
       listPhase.value = [] // 调相相偏
-      listFrequencySpectrum.value = [] // 频谱纯度
+      listFrequencySpectrum.value = [] // 谐波
       form.value.remark = ''
     })
 }
 
+// 保存之前校验
+const checkListBeforeSave = () => {
+  console.log('保存之前校验')
+  // 验空
+  if (frequency.value && !listFrequency.value.length) { //	频率
+    ElMessage.warning('频率 不能为空')
+    return false
+  }
+  if (powerLevel.value && !listPowerLevel.value.length) { // 功率
+    ElMessage.warning('功率 不能为空')
+    return false
+  }
+  if (relativeLevel.value && !listRelativeLevel.value.length) { // 相对电平
+    ElMessage.warning('相对电平 不能为空')
+    return false
+  }
+  if (AMDepth.value && !listAMDepth.value.length) { // 调幅度
+    ElMessage.warning('调幅度 不能为空')
+    return false
+  }
+  if (frequencyModulationDeviation.value && !listFrequencyModulationDeviation.value.length) { // 调频频偏
+    ElMessage.warning('调频频偏 不能为空')
+    return false
+  }
+  if (phase.value && !listPhase.value.length) { // 调相相偏
+    ElMessage.warning('调相相偏 不能为空')
+    return false
+  }
+  if (frequencySpectrum.value && !listFrequencySpectrum.value.length) { // 谐波
+    ElMessage.warning('谐波 不能为空')
+    return false
+  }
+
+  if (frequency.value) {
+    frequencyResult = checkList(listFrequency.value, '频率')
+  }
+  if (powerLevel.value) {
+    powerLevelResult = checkList(listPowerLevel.value, '功率')
+  }
+  if (relativeLevel.value) {
+    relativeLevelResult = checkList(listRelativeLevel.value, '相对电平')
+  }
+  if (AMDepth.value) {
+    AMDepthResult = checkList(listAMDepth.value, '调幅度')
+  }
+  if (frequencyModulationDeviation.value) {
+    frequencyModulationDeviationResult = checkList(listFrequencyModulationDeviation.value, '调频频偏')
+  }
+  if (phase.value) {
+    phaseResult = checkList(listPhase.value, '调相相偏')
+  }
+  if (frequencySpectrum.value) {
+    frequencySpectrumResult = checkList(listFrequencySpectrum.value, '谐波')
+  }
+
+  if (frequencyResult && powerLevelResult && relativeLevelResult && AMDepthResult && frequencyModulationDeviationResult && phaseResult && frequencySpectrumResult) {
+    // return true
+    console.log('checkList校验通过')
+  }
+  else {
+    console.log('checkList校验不通过')
+    return false
+  }
+
+  // 检查频率点和频率点单位不能同时完全一样
+  const listFrequencyResult = checkArrayDataUnique(listFrequency.value)
+  const listPowerLevelResult = checkArrayDataUnique(listPowerLevel.value)
+  const listRelativeLevelResult = checkArrayDataUnique(listRelativeLevel.value)
+  const listAMDepthResult = checkArrayDataUnique(listAMDepth.value)
+  const listFrequencyModulationDeviationResult = checkArrayDataUnique(listFrequencyModulationDeviation.value)
+  const listPhaseResult = checkArrayDataUnique(listPhase.value)
+  const listFrequencySpectrumResult = checkArrayDataUnique(listFrequencySpectrum.value)
+  if (listFrequencyResult
+    && listPowerLevelResult
+    && listRelativeLevelResult
+    && listAMDepthResult
+    && listFrequencyModulationDeviationResult
+    && listPhaseResult
+    && listFrequencySpectrumResult
+  ) {
+    return true
+  }
+  else {
+    return false
+  }
+}
+
+// 校验表格中不能同时出现核查项目和核查点、单位两个属性同时相同的两条数据
+function checkArrayDataUnique(list: any) {
+  for (let i = 0; i < list.length; i++) {
+    const j = i + 1
+    for (let j = 0; j < list.length; j++) {
+      if (i !== j && list[i].params === list[j].params && (list[i].checkPoint + list[i].unit) === (list[j].checkPoint + list[j].unit)) {
+        ElMessage.warning(`${list[i].params} 第${i + 1}行第${j + 1}行的 频率点和单位不能同时完全一样`)
+        return false
+      }
+    }
+  }
+  return true
+}
+
+// 保存之前处理数据
+const solveDataBeforeSave = () => {
+  // 数据处理
+  let tempList = [] as any
+  if (frequency.value) { //	频率
+    tempList = tempList.concat(listFrequency.value)
+  }
+  if (powerLevel.value) { // 功率
+    tempList = tempList.concat(listPowerLevel.value)
+  }
+  if (relativeLevel.value) { // 相对电平
+    tempList = tempList.concat(listRelativeLevel.value)
+  }
+  if (AMDepth.value) { // 调幅度
+    tempList = tempList.concat(listAMDepth.value)
+  }
+  if (frequencyModulationDeviation.value) { // 调频频偏
+    tempList = tempList.concat(listFrequencyModulationDeviation.value)
+  }
+  if (phase.value) { // 调相相偏
+    tempList = tempList.concat(listPhase.value)
+  }
+  if (frequencySpectrum.value) { // 谐波
+    tempList = tempList.concat(listFrequencySpectrum.value)
+  }
+
+  tempList = tempList.map((item: { id: string }) => {
+    return {
+      ...item,
+      id: '',
+      remark: form.value.remark,
+    }
+  })
+  return tempList
+}
+
 // 点击保存
 const save = () => {
-  // if (!list.value.length) { ElMessage.warning('核查项不能为空'); return false }
-  // if (!checkList(list.value, '核查项表格')) { return false }
-  // const params = {
-  //   itemCategoryId: form.value.itemCategoryId, // 核查项分类id
-  //   checkItemDataPistonGaugeList: list.value,
-  // }
-  // const loading = ElLoading.service({
-  //   lock: true,
-  //   text: '加载中',
-  //   background: 'rgba(255, 255, 255, 0.6)',
-  // })
-  // config(params).then((res) => {
-  //   ElMessage.success('已保存')
-  //   pageType.value = 'detail'
-  //   loading.close()
-  // })
+  if (!checkReferencePoint()) { return false }
+  if (!checkListBeforeSave()) { return false }
+  const list = solveDataBeforeSave()
+  const params = {
+    itemCategoryId: form.value.itemCategoryId, // 核查项分类id
+    checkItemDataOscilloscopeList: list,
+    equipmentId: equipmentId.value,
+  }
+  const loading = ElLoading.service({
+    lock: true,
+    text: '加载中',
+    background: 'rgba(255, 255, 255, 0.6)',
+  })
+  config(params).then((res) => {
+    ElMessage.success('已保存')
+    pageType.value = 'detail'
+    loading.close()
+  })
 }
 
 // 获取详情
 const getInfo = () => {
-  // const loading = ElLoading.service({
-  //   lock: true,
-  //   text: '加载中',
-  //   background: 'rgba(255, 255, 255, 0.6)',
-  // })
+  const loading = ElLoading.service({
+    lock: true,
+    text: '加载中',
+    background: 'rgba(255, 255, 255, 0.6)',
+  })
   const params = {
     equipmentId: equipmentId.value, // 设备id
     belongStandardEquipment: form.value.belongStandardEquipment, // 检校标准装置code
     itemCategoryId: form.value.itemCategoryId, // 核查项分类id
     itemCategoryName: form.value.itemCategoryName, // 核查项分类名称
   }
-  // getCheckItemDetail(params).then((res) => {
-  //   list.value = res.data.checkItemDataPistonGaugeList.map((item: any) => {
-  //     return {
-  //       ...item,
-  //       resolution: Number(item.resolution),
-  //     }
-  //   })
-  //   loading.close()
-  // })
+  getCheckItemDetail(params).then((res) => {
+    if (res.data && res.data.checkItemDataSignalGeneratorList && res.data.checkItemDataSignalGeneratorList.length) {
+      listFrequency.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '频率')
+      listPowerLevel.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '功率')
+      listRelativeLevel.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '相对电平')
+      listAMDepth.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '调幅度')
+      listFrequencyModulationDeviation.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '调频频偏')
+      listPhase.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '调相相偏')
+      listFrequencySpectrum.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '谐波')
+    }
+    loading.close()
+  })
 }
 
 // ------------------------------------------钩子--------------------------------------------------
@@ -334,7 +656,7 @@
   form.value.belongStandardEquipment = $route.query.belongStandardEquipment as string // 核查项标准装置id
   form.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string // 核查项标准装置id
   equipmentId.value = $route.query.equipmentId as string // 设备id
-  // getInfo()
+  getInfo()
 })
 </script>
 
@@ -448,14 +770,14 @@
       <template-table v-if="frequency" :data="listFrequency" :columns="columns_frequency" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频率')" />
     </detail-block>
 
-    <!-- 功率电平 -->
+    <!-- 功率 -->
     <detail-block title="" style="padding-bottom: 20px;">
       <div style="display: flex;justify-content: space-between;">
         <el-checkbox v-model="powerLevel" :disabled="pageType === 'detail'">
-          功率电平
+          功率
         </el-checkbox>
         <div v-if="powerLevel && pageType !== 'detail'" style="padding: 0 10px;padding-bottom: 10px;">
-          <el-button type="primary" @click="addRow(listPowerLevel, '功率电平')">
+          <el-button type="primary" @click="addRow(listPowerLevel, '功率')">
             增加行
           </el-button>
           <el-button type="info" @click="delRow(checkoutPowerLevelList, listPowerLevel)">
@@ -463,7 +785,7 @@
           </el-button>
         </div>
       </div>
-      <template-table v-if="powerLevel" :data="listPowerLevel" :columns="columns_powerLevel" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '功率电平')" />
+      <template-table v-if="powerLevel" :data="listPowerLevel" :columns="columns_powerLevel" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '功率')" />
     </detail-block>
 
     <!-- 相对电平 -->
@@ -538,14 +860,14 @@
       <template-table v-if="phase" :data="listPhase" :columns="columns_phase" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '调相相偏')" />
     </detail-block>
 
-    <!-- 频谱纯度 -->
+    <!-- 谐波 -->
     <detail-block title="" style="padding-bottom: 20px;">
       <div style="display: flex;justify-content: space-between;">
         <el-checkbox v-model="frequencySpectrum" :disabled="pageType === 'detail'">
-          频谱纯度
+          谐波
         </el-checkbox>
         <div v-if="frequencySpectrum && pageType !== 'detail'" style="padding: 0 10px;padding-bottom: 10px;">
-          <el-button type="primary" @click="addRow(listFrequencySpectrum, '频谱纯度')">
+          <el-button type="primary" @click="addRow(listFrequencySpectrum, '谐波')">
             增加行
           </el-button>
           <el-button type="info" @click="delRow(checkoutFrequencySpectrumList, listFrequencySpectrum)">
@@ -553,7 +875,7 @@
           </el-button>
         </div>
       </div>
-      <template-table v-if="frequencySpectrum" :data="listFrequencySpectrum" :columns="columns_frequencySpectrum" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频谱纯度')" />
+      <template-table v-if="frequencySpectrum" :data="listFrequencySpectrum" :columns="columns_frequencySpectrum" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '谐波')" />
     </detail-block>
 
     <!-- 核查项备注 -->

diff --git a/src/views/equipement/standard/book/components/config/tenth/config.vue b/src/views/equipement/standard/book/components/config/tenth/config.vue
index 12224ad..5fc9d30 100644
--- a/src/views/equipement/standard/book/components/config/tenth/config.vue
+++ b/src/views/equipement/standard/book/components/config/tenth/config.vue
@@ -1,4 +1,4 @@
-<!-- 标准装置台账信息详情 配置核查项 第13套：示波器检定装置 -->
+<!-- 标准装置台账信息详情 配置核查项 第10套：信号发生器 -->
 <script name="StandardBookEquipmentConfig" lang="ts" setup>
 import { ElLoading, ElMessage, ElMessageBox } from 'element-plus'
 import type { IList } from './tenth-interface'
@@ -44,120 +44,131 @@
 }
 // -------------------------------------------核查项-----------------------------------------------
 const listFrequency = ref<IList[]>([]) // 频率
-const listPowerLevel = ref<IList[]>([]) // 功率电平
+const listPowerLevel = ref<IList[]>([]) // 功率
 const listRelativeLevel = ref<IList[]>([]) // 相对电平
 const listAMDepth = ref<IList[]>([]) // 调幅度
 const listFrequencyModulationDeviation = ref<IList[]>([]) // 调频频偏
 const listPhase = ref<IList[]>([]) // 调相相偏
-const listFrequencySpectrum = ref<IList[]>([]) // 频谱纯度
+const listFrequencySpectrum = ref<IList[]>([]) // 谐波
 
 const checkoutFrequencyList = ref<IList[]>([]) // 频率多选
-const checkoutPowerLevelList = ref<IList[]>([]) // 功率电平多选
+const checkoutPowerLevelList = ref<IList[]>([]) // 功率多选
 const checkoutRelativeLevelList = ref<IList[]>([]) // 相对电平多选
 const checkoutAMDepthList = ref<IList[]>([]) // 调幅度多选
 const checkoutfrequencyModulationDeviationList = ref<IList[]>([]) // 调频频偏多选
 const checkoutPhaseList = ref<IList[]>([]) // 调相相偏多选
-const checkoutFrequencySpectrumList = ref<IList[]>([]) // 频谱纯度多选
+const checkoutFrequencySpectrumList = ref<IList[]>([]) // 谐波多选
 
 const frequency = ref(true) // 是否显示频率
-const powerLevel = ref(true) // 功率电平
+const powerLevel = ref(true) // 功率
 const relativeLevel = ref(true) // 相对电平
 const AMDepth = ref(true) // 调幅度
 const frequencyModulationDeviation = ref(true) // 调频频偏
 const phase = ref(true) // 调相相偏
-const frequencySpectrum = ref(true) // 频谱纯度
+const frequencySpectrum = ref(true) // 谐波
 
 const columns_frequency = ref<TableColumn[]>([ // 频率
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
-const columns_powerLevel = ref<TableColumn[]>([ // 功率电平
+const columns_powerLevel = ref<TableColumn[]>([ // 功率
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '功率', value: 'resolution', align: 'center', required: true },
-  { text: '功率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '功率', value: 'power', align: 'center', required: true, width: '180' },
+  { text: '功率单位', value: 'powerUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_relativeLevel = ref<TableColumn[]>([ // 相对电平
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '相对电平', value: 'resolution', align: 'center', required: true },
-  { text: '相对电平单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '相对电平', value: 'relativeLevel', align: 'center', required: true, width: '180' },
+  { text: '相对电平单位', value: 'relativeLevelUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_AMDepth = ref<TableColumn[]>([ // 调幅度
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '调幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '调幅度', value: 'modulation', align: 'center', required: true, width: '180' },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '高通滤波', value: 'highPassFilter', align: 'center', required: true, width: '180' },
+  { text: '高通滤波单位', value: 'highPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '低通滤波', value: 'lowerPassFilter', align: 'center', required: true, width: '180' },
+  { text: '低通滤波单位', value: 'lowerPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '调制速率', value: 'modulationRate', align: 'center', required: true, width: '180' },
+  { text: '调制速率单位', value: 'modulationRateUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)/%', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_frequencyModulationDeviation = ref<TableColumn[]>([ // 调频频偏
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '调频频偏', value: 'resolution', align: 'center', required: true },
-  { text: '调频频偏单位', value: 'resolution', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '调频频偏', value: 'frequencyDeviation', align: 'center', required: true },
+  { text: '调频频偏单位', value: 'frequencyDeviationUnit', align: 'center', required: true },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '高通滤波', value: 'highPassFilter', align: 'center', required: true, width: '180' },
+  { text: '高通滤波单位', value: 'highPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '低通滤波', value: 'lowerPassFilter', align: 'center', required: true, width: '180' },
+  { text: '低通滤波单位', value: 'lowerPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '调制速率', value: 'modulationRate', align: 'center', required: true, width: '180' },
+  { text: '调制速率单位', value: 'modulationRateUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)/%', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 const columns_phase = ref<TableColumn[]>([ // 调相相偏
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '调相相偏', value: 'resolution', align: 'center', required: true },
-  { text: '调相相偏单位', value: 'resolution', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '高通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波', value: 'checkType', align: 'center', required: true },
-  { text: '低通滤波单位', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率', value: 'checkType', align: 'center', required: true },
-  { text: '调制速率单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '调相相偏', value: 'phaseDeviation', align: 'center', required: true },
+  { text: '调相相偏单位', value: 'phaseDeviationUnit', align: 'center', required: true },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: '高通滤波', value: 'highPassFilter', align: 'center', required: true, width: '180' },
+  { text: '高通滤波单位', value: 'highPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '低通滤波', value: 'lowerPassFilter', align: 'center', required: true, width: '180' },
+  { text: '低通滤波单位', value: 'lowerPassFilterUnit', align: 'center', required: true, width: '100' },
+  { text: '调制速率', value: 'modulationRate', align: 'center', required: true, width: '180' },
+  { text: '调制速率单位', value: 'modulationRateUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)/%', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
-const columns_frequencySpectrum = ref<TableColumn[]>([ // 频谱纯度
+const columns_frequencySpectrum = ref<TableColumn[]>([ // 谐波
   { text: '核查项目', value: 'params', align: 'center', required: true },
-  { text: '频率点', value: 'checkPoint', align: 'center', required: true },
-  { text: '频率点单位', value: 'unit', align: 'center', required: true },
-  { text: '幅度', value: 'resolution', align: 'center', required: true },
-  { text: '幅度单位', value: 'checkType', align: 'center', required: true },
-  { text: 'U(k=2)', value: 'checkType', align: 'center', required: true },
+  { text: '频率点', value: 'checkPoint', align: 'center', required: true, width: '180' },
+  { text: '频率点单位', value: 'unit', align: 'center', required: true, width: '100' },
+  { text: '幅度', value: 'amplitude', align: 'center', required: true, width: '180' },
+  { text: '幅度单位', value: 'amplitudeUnit', align: 'center', required: true, width: '100' },
+  { text: 'RBW', value: 'rbwValue', align: 'center', required: true, width: '180' },
+  { text: 'RBW单位', value: 'rbwValueUnit', align: 'center', required: true, width: '100' },
+  { text: 'VBW', value: 'vbwValue', align: 'center', required: true, width: '180' },
+  { text: 'VBW单位', value: 'vbwValueUnit', align: 'center', required: true, width: '100' },
+  { text: '循环次数', value: 'cycleNumber', align: 'center', required: true },
   { text: '核查类型', value: 'checkType', align: 'center', required: true },
+  { text: 'U(k=2)', value: 'urel', align: 'center', required: true, width: '180' },
 ])
 
 // 多选
@@ -166,7 +177,7 @@
     case '频率':
       checkoutFrequencyList.value = e
       break
-    case '功率电平':
+    case '功率':
       checkoutPowerLevelList.value = e
       break
     case '相对电平':
@@ -181,15 +192,46 @@
     case '调相相偏':
       checkoutPhaseList.value = e
       break
-    case '频谱纯度':
+    case '谐波':
       checkoutFrequencySpectrumList.value = e
       break
   }
 }
 
 // 校验表格（点击保存的时候、增加行用）
-const checkList = (list: any, title: string) => {
-  // return useCheckList(list, columns.value, title)
+const checkList = (list: any, getTitle: string) => {
+  let title = ''
+  if (getTitle.slice(getTitle.length - 2) === '表格') {
+    title = getTitle.slice(0, getTitle.length - 2)
+  }
+  else {
+    title = getTitle
+  }
+  let columns
+  switch (title) {
+    case '频率':
+      columns = columns_frequency.value
+      break
+    case '功率':
+      columns = columns_powerLevel.value
+      break
+    case '相对电平':
+      columns = columns_relativeLevel.value
+      break
+    case '调幅度':
+      columns = columns_AMDepth.value
+      break
+    case '调频频偏':
+      columns = columns_frequencyModulationDeviation.value
+      break
+    case '调相相偏':
+      columns = columns_phase.value
+      break
+    case '谐波':
+      columns = columns_frequencySpectrum.value
+      break
+  }
+  return useCheckList(list, columns, `${title}表格`)
 }
 
 /**
@@ -198,53 +240,191 @@
  * @param title 操作的表格
  */
 const addRow = (list: IList[], title: string) => {
-  // if (checkList(list, `${title}表格`)) {
-  //   if (list.length) { // 增加行时默认上一行数据
-  //     list.push({
-  //       id: '',
-  //       checkPoint: list[list.length - 1].checkPoint, //	核查点(直接存字典value)
-  //       checkType: list[list.length - 1].checkType, //	核查类型
-  //       cycleNumber: list[list.length - 1].cycleNumber, //	循环次数
-  //       equipmentId: list[list.length - 1].equipmentId, //	配套设备id
-  //       itemCategoryId: list[list.length - 1].itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
-  //       params: list[list.length - 1].params, //	核查项目(直接存字典value)
-  //       remark: list[list.length - 1].remark, //	核查项备注(每个数据存储的核查项备注相同，前端取列表中一个即可)
-  //       resolution: list[list.length - 1].resolution, //		分辨力
-  //       testType: list[list.length - 1].testType, // 核查点类型(直接存字典value)
-  //       unit: list[list.length - 1].unit, //	单位(直接存字典value)
-  //       urel: list[list.length - 1].urel, //	测量标准相对扩展不确定度urel
-  //     })
-  //   }
-  //   else {
-  //     list.push({
-  //       checkPoint: '', //	核查点
-  //       checkType: '', //	核查类型(直接存字典value，多个逗号分隔)
-  //       cycleNumber: 6, //	循环次数
-  //       equipmentId: infoId.value, //	配套设备id
-  //       itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
-  //       params: '', //	核查项目(直接存字典value)
-  //       remark: '', //	核查项备注
-  //       resolution: 0.0001, //	分辨力
-  //       testType: title, //	核查点类型(直接存字典value)
-  //       unit: '', //	单位(直接存字典value)
-  //       urel: 0, //	测量标准相对扩展不确定度urel
-  //     })
-  //   }
-  // }
+  if (checkList(list, `${title}表格`)) {
+    if (list.length) { // 增加行时默认上一行数据
+      list.push({ ...list[list.length - 1] })
+    }
+    else {
+      switch (title) {
+        case '频率':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '功率':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            power: '', //	功率
+            powerUnit: 'dBm', // 功率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '相对电平':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            relativeLevel: '', //	相对电平
+            relativeLevelUnit: 'dBm', // 相对电平单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '调幅度':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            modulation: '', // 调幅度
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            highPassFilter: '50', //	高通滤波
+            highPassFilterUnit: 'Hz', //	高通滤波单位
+            lowerPassFilter: '3', //	低通滤波
+            lowerPassFilterUnit: 'kHz', //	低通滤波单位
+            modulationRate: '', //	调制速率
+            modulationRateUnit: 'Hz', //	调制速率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '调频频偏':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            frequencyDeviation: '', //	调频频偏
+            frequencyDeviationUnit: 'MHz', // 调频频偏单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            highPassFilter: '50', //	高通滤波
+            highPassFilterUnit: 'Hz', //	高通滤波单位
+            lowerPassFilter: '3', //	低通滤波
+            lowerPassFilterUnit: 'kHz', //	低通滤波单位
+            modulationRate: '', //	调制速率
+            modulationRateUnit: 'Hz', //	调制速率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '调相相偏':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            phaseDeviation: '', //	调相相偏
+            phaseDeviationUnit: 'rad', // 调相相偏单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            highPassFilter: '50', //	高通滤波
+            highPassFilterUnit: 'Hz', //	高通滤波单位
+            lowerPassFilter: '3', //	低通滤波
+            lowerPassFilterUnit: 'kHz', //	低通滤波单位
+            modulationRate: '', //	调制速率
+            modulationRateUnit: 'Hz', //	调制速率单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+        case '谐波':
+          list.push({
+            equipmentId: infoId.value, //	配套设备id
+            itemCategoryId: form.value.itemCategoryId, //	核查项分类id(能够确定是哪个标准装置)
+            id: '',
+            params: title, // 核查项目
+            checkPoint: '', //	频率点
+            unit: 'MHz', // 频率点单位
+            amplitude: '', //	幅度
+            amplitudeUnit: 'dBm', // 幅度单位
+            rbwValue: '1', //	RBW
+            rbwValueUnit: 'kHz', //	RBW单位
+            vbwValue: '1', //	VBW
+            vbwValueUnit: 'kHz', //	VBW单位
+            cycleNumber: 10, //	循环次数
+            checkType: '重复性, 稳定性', //	核查类型(直接存字典value，多个逗号分隔)
+            remark: '', //	核查项备注
+            urel: 0, //	U(k=2)
+          })
+          break
+      }
+    }
+  }
 }
+
 /**
  * 删除行公共方法
  * @param checkoutList 选中的数组
  * @param list 操作的数组
  */
-const delRow = (checkoutList: IList[], list: IList[]) => {
+const delRow = (checkoutList: IList[], list: IList[], title: string) => {
   if (!checkoutList.length) {
     ElMessage.warning('请选中要删除的行')
   }
   else {
-    list = list.filter((item: any) => {
-      return !checkoutList.includes(item)
-    })
+    let data = [] as any[]
+    data = differenceArray(list, checkoutList)
+    switch (title) {
+      case '频率':
+        listFrequency.value = data
+        break
+      case '功率':
+        listPowerLevel.value = data
+        break
+      case '相对电平':
+        listRelativeLevel.value = data
+        break
+      case '调幅度':
+        listAMDepth.value = data
+        break
+      case '调频频偏':
+        listFrequencyModulationDeviation.value = data
+        break
+      case '调相相偏':
+        listPhase.value = data
+        break
+      case '谐波':
+        listFrequencySpectrum.value = data
+        break
+    }
   }
 }
 
@@ -266,58 +446,200 @@
   )
     .then(() => {
       listFrequency.value = [] // 频率
-      listPowerLevel.value = [] // 功率电平
+      listPowerLevel.value = [] // 功率
       listRelativeLevel.value = [] // 相对电平
       listAMDepth.value = [] // 调幅度
       listFrequencyModulationDeviation.value = [] // 调频频偏
       listPhase.value = [] // 调相相偏
-      listFrequencySpectrum.value = [] // 频谱纯度
+      listFrequencySpectrum.value = [] // 谐波
       form.value.remark = ''
     })
 }
 
+// 保存之前校验
+const checkListBeforeSave = () => {
+  console.log('保存之前校验')
+  // 验空
+  if (frequency.value && !listFrequency.value.length) { //	频率
+    ElMessage.warning('频率 不能为空')
+    return false
+  }
+  if (powerLevel.value && !listPowerLevel.value.length) { // 功率
+    ElMessage.warning('功率 不能为空')
+    return false
+  }
+  if (relativeLevel.value && !listRelativeLevel.value.length) { // 相对电平
+    ElMessage.warning('相对电平 不能为空')
+    return false
+  }
+  if (AMDepth.value && !listAMDepth.value.length) { // 调幅度
+    ElMessage.warning('调幅度 不能为空')
+    return false
+  }
+  if (frequencyModulationDeviation.value && !listFrequencyModulationDeviation.value.length) { // 调频频偏
+    ElMessage.warning('调频频偏 不能为空')
+    return false
+  }
+  if (phase.value && !listPhase.value.length) { // 调相相偏
+    ElMessage.warning('调相相偏 不能为空')
+    return false
+  }
+  if (frequencySpectrum.value && !listFrequencySpectrum.value.length) { // 谐波
+    ElMessage.warning('谐波 不能为空')
+    return false
+  }
+
+  if (frequency.value) {
+    frequencyResult = checkList(listFrequency.value, '频率')
+  }
+  if (powerLevel.value) {
+    powerLevelResult = checkList(listPowerLevel.value, '功率')
+  }
+  if (relativeLevel.value) {
+    relativeLevelResult = checkList(listRelativeLevel.value, '相对电平')
+  }
+  if (AMDepth.value) {
+    AMDepthResult = checkList(listAMDepth.value, '调幅度')
+  }
+  if (frequencyModulationDeviation.value) {
+    frequencyModulationDeviationResult = checkList(listFrequencyModulationDeviation.value, '调频频偏')
+  }
+  if (phase.value) {
+    phaseResult = checkList(listPhase.value, '调相相偏')
+  }
+  if (frequencySpectrum.value) {
+    frequencySpectrumResult = checkList(listFrequencySpectrum.value, '谐波')
+  }
+
+  if (frequencyResult && powerLevelResult && relativeLevelResult && AMDepthResult && frequencyModulationDeviationResult && phaseResult && frequencySpectrumResult) {
+    // return true
+    console.log('checkList校验通过')
+  }
+  else {
+    console.log('checkList校验不通过')
+    return false
+  }
+
+  // 检查频率点和频率点单位不能同时完全一样
+  const listFrequencyResult = checkArrayDataUnique(listFrequency.value)
+  const listPowerLevelResult = checkArrayDataUnique(listPowerLevel.value)
+  const listRelativeLevelResult = checkArrayDataUnique(listRelativeLevel.value)
+  const listAMDepthResult = checkArrayDataUnique(listAMDepth.value)
+  const listFrequencyModulationDeviationResult = checkArrayDataUnique(listFrequencyModulationDeviation.value)
+  const listPhaseResult = checkArrayDataUnique(listPhase.value)
+  const listFrequencySpectrumResult = checkArrayDataUnique(listFrequencySpectrum.value)
+  if (listFrequencyResult
+    && listPowerLevelResult
+    && listRelativeLevelResult
+    && listAMDepthResult
+    && listFrequencyModulationDeviationResult
+    && listPhaseResult
+    && listFrequencySpectrumResult
+  ) {
+    return true
+  }
+  else {
+    return false
+  }
+}
+
+// 校验表格中不能同时出现核查项目和核查点、单位两个属性同时相同的两条数据
+function checkArrayDataUnique(list: any) {
+  for (let i = 0; i < list.length; i++) {
+    const j = i + 1
+    for (let j = 0; j < list.length; j++) {
+      if (i !== j && list[i].params === list[j].params && (list[i].checkPoint + list[i].unit) === (list[j].checkPoint + list[j].unit)) {
+        ElMessage.warning(`${list[i].params} 第${i + 1}行第${j + 1}行的 频率点和单位不能同时完全一样`)
+        return false
+      }
+    }
+  }
+  return true
+}
+
+// 保存之前处理数据
+const solveDataBeforeSave = () => {
+  // 数据处理
+  let tempList = [] as any
+  if (frequency.value) { //	频率
+    tempList = tempList.concat(listFrequency.value)
+  }
+  if (powerLevel.value) { // 功率
+    tempList = tempList.concat(listPowerLevel.value)
+  }
+  if (relativeLevel.value) { // 相对电平
+    tempList = tempList.concat(listRelativeLevel.value)
+  }
+  if (AMDepth.value) { // 调幅度
+    tempList = tempList.concat(listAMDepth.value)
+  }
+  if (frequencyModulationDeviation.value) { // 调频频偏
+    tempList = tempList.concat(listFrequencyModulationDeviation.value)
+  }
+  if (phase.value) { // 调相相偏
+    tempList = tempList.concat(listPhase.value)
+  }
+  if (frequencySpectrum.value) { // 谐波
+    tempList = tempList.concat(listFrequencySpectrum.value)
+  }
+
+  tempList = tempList.map((item: { id: string }) => {
+    return {
+      ...item,
+      id: '',
+      remark: form.value.remark,
+    }
+  })
+  return tempList
+}
+
 // 点击保存
 const save = () => {
-  // if (!list.value.length) { ElMessage.warning('核查项不能为空'); return false }
-  // if (!checkList(list.value, '核查项表格')) { return false }
-  // const params = {
-  //   itemCategoryId: form.value.itemCategoryId, // 核查项分类id
-  //   checkItemDataPistonGaugeList: list.value,
-  // }
-  // const loading = ElLoading.service({
-  //   lock: true,
-  //   text: '加载中',
-  //   background: 'rgba(255, 255, 255, 0.6)',
-  // })
-  // config(params).then((res) => {
-  //   ElMessage.success('已保存')
-  //   pageType.value = 'detail'
-  //   loading.close()
-  // })
+  if (!checkReferencePoint()) { return false }
+  if (!checkListBeforeSave()) { return false }
+  const list = solveDataBeforeSave()
+  const params = {
+    itemCategoryId: form.value.itemCategoryId, // 核查项分类id
+    checkItemDataOscilloscopeList: list,
+    equipmentId: equipmentId.value,
+  }
+  const loading = ElLoading.service({
+    lock: true,
+    text: '加载中',
+    background: 'rgba(255, 255, 255, 0.6)',
+  })
+  config(params).then((res) => {
+    ElMessage.success('已保存')
+    pageType.value = 'detail'
+    loading.close()
+  })
 }
 
 // 获取详情
 const getInfo = () => {
-  // const loading = ElLoading.service({
-  //   lock: true,
-  //   text: '加载中',
-  //   background: 'rgba(255, 255, 255, 0.6)',
-  // })
+  const loading = ElLoading.service({
+    lock: true,
+    text: '加载中',
+    background: 'rgba(255, 255, 255, 0.6)',
+  })
   const params = {
     equipmentId: equipmentId.value, // 设备id
     belongStandardEquipment: form.value.belongStandardEquipment, // 检校标准装置code
     itemCategoryId: form.value.itemCategoryId, // 核查项分类id
     itemCategoryName: form.value.itemCategoryName, // 核查项分类名称
   }
-  // getCheckItemDetail(params).then((res) => {
-  //   list.value = res.data.checkItemDataPistonGaugeList.map((item: any) => {
-  //     return {
-  //       ...item,
-  //       resolution: Number(item.resolution),
-  //     }
-  //   })
-  //   loading.close()
-  // })
+  getCheckItemDetail(params).then((res) => {
+    if (res.data && res.data.checkItemDataSignalGeneratorList && res.data.checkItemDataSignalGeneratorList.length) {
+      listFrequency.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '频率')
+      listPowerLevel.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '功率')
+      listRelativeLevel.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '相对电平')
+      listAMDepth.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '调幅度')
+      listFrequencyModulationDeviation.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '调频频偏')
+      listPhase.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '调相相偏')
+      listFrequencySpectrum.value = res.data.checkItemDataSignalGeneratorList.filter((item: { params: string }) => item.params === '谐波')
+    }
+    loading.close()
+  })
 }
 
 // ------------------------------------------钩子--------------------------------------------------
@@ -334,7 +656,7 @@
   form.value.belongStandardEquipment = $route.query.belongStandardEquipment as string // 核查项标准装置id
   form.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string // 核查项标准装置id
   equipmentId.value = $route.query.equipmentId as string // 设备id
-  // getInfo()
+  getInfo()
 })
 </script>
 
@@ -448,14 +770,14 @@
       <template-table v-if="frequency" :data="listFrequency" :columns="columns_frequency" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频率')" />
     </detail-block>
 
-    <!-- 功率电平 -->
+    <!-- 功率 -->
     <detail-block title="" style="padding-bottom: 20px;">
       <div style="display: flex;justify-content: space-between;">
         <el-checkbox v-model="powerLevel" :disabled="pageType === 'detail'">
-          功率电平
+          功率
         </el-checkbox>
         <div v-if="powerLevel && pageType !== 'detail'" style="padding: 0 10px;padding-bottom: 10px;">
-          <el-button type="primary" @click="addRow(listPowerLevel, '功率电平')">
+          <el-button type="primary" @click="addRow(listPowerLevel, '功率')">
             增加行
           </el-button>
           <el-button type="info" @click="delRow(checkoutPowerLevelList, listPowerLevel)">
@@ -463,7 +785,7 @@
           </el-button>
         </div>
       </div>
-      <template-table v-if="powerLevel" :data="listPowerLevel" :columns="columns_powerLevel" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '功率电平')" />
+      <template-table v-if="powerLevel" :data="listPowerLevel" :columns="columns_powerLevel" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '功率')" />
     </detail-block>
 
     <!-- 相对电平 -->
@@ -538,14 +860,14 @@
       <template-table v-if="phase" :data="listPhase" :columns="columns_phase" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '调相相偏')" />
     </detail-block>
 
-    <!-- 频谱纯度 -->
+    <!-- 谐波 -->
     <detail-block title="" style="padding-bottom: 20px;">
       <div style="display: flex;justify-content: space-between;">
         <el-checkbox v-model="frequencySpectrum" :disabled="pageType === 'detail'">
-          频谱纯度
+          谐波
         </el-checkbox>
         <div v-if="frequencySpectrum && pageType !== 'detail'" style="padding: 0 10px;padding-bottom: 10px;">
-          <el-button type="primary" @click="addRow(listFrequencySpectrum, '频谱纯度')">
+          <el-button type="primary" @click="addRow(listFrequencySpectrum, '谐波')">
             增加行
           </el-button>
           <el-button type="info" @click="delRow(checkoutFrequencySpectrumList, listFrequencySpectrum)">
@@ -553,7 +875,7 @@
           </el-button>
         </div>
       </div>
-      <template-table v-if="frequencySpectrum" :data="listFrequencySpectrum" :columns="columns_frequencySpectrum" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频谱纯度')" />
+      <template-table v-if="frequencySpectrum" :data="listFrequencySpectrum" :columns="columns_frequencySpectrum" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '谐波')" />
     </detail-block>
 
     <!-- 核查项备注 -->
diff --git a/src/views/equipement/standard/book/components/config/tenth/tenth-interface.ts b/src/views/equipement/standard/book/components/config/tenth/tenth-interface.ts
index 44dc61a..e49816b 100644
--- a/src/views/equipement/standard/book/components/config/tenth/tenth-interface.ts
+++ b/src/views/equipement/standard/book/components/config/tenth/tenth-interface.ts
@@ -1,3 +1,38 @@
 export interface IList {
-  id?: string //	id，更新/删除使用参数
+  id: string //	id，更新/删除使用参数
+  equipmentId: string //	配套设备id
+  params: string //	核查项目(字典value)
+  itemCategoryId?: string //	核查项分类id(能够确定是哪个标准装置)
+
+  checkPoint?: string //	频率点(字典value)
+  unit?: string //	频率点单位(字典value)
+  amplitude?: string //	幅度
+  amplitudeUnit?: string // 幅度单位(字典value)
+  checkType?: string //	核查类型(字典value)
+  cycleNumber?: number //	循环次数
+  urel?: number //	U(k=2)
+
+  power?: string //	功率(字典value)
+  powerUnit?: string //	功率单位(字典value)
+
+  relativeLevel?: string //	相对电平(字典value)
+  relativeLevelUnit?: string //	相对电平单位(字典value)
+
+  modulation?: string //	调幅度
+
+  frequencyDeviation?: string //	调频频偏
+  frequencyDeviationUnit?: string //	调频频偏单位
+  highPassFilter?: string //	高通滤波
+  highPassFilterUnit?: string //	高通滤波单位
+  lowerPassFilter?: string //	低通滤波
+  lowerPassFilterUnit?: string //	低通滤波单位
+  modulationRate?: string //	调制速率
+  modulationRateUnit?: string //	调制速率单位
+  phaseDeviation?: string //	调相相偏
+  phaseDeviationUnit?: string //	调相相偏单位
+  rbwValue?: string //	RBW
+  rbwValueUnit?: string //	RBW单位
+  remark?: string //	核查项备注
+  vbwValue?: string //	VBW
+  vbwValueUnit?: string //	VBW单位
 }