diff --git a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
index 349b091..e4d1547 100644
--- a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
+++ b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
@@ -378,7 +378,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频率显示')" />
+        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" />
       </detail-block>
       <!-- 扫频宽度 -->
       <detail-block title="扫频宽度">
@@ -387,7 +387,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '扫频宽度')" />
+        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽 -->
@@ -397,7 +397,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽')" />
+        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽转换偏差 -->
@@ -407,7 +407,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽转换偏差')" />
+        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" />
       </detail-block>
 
       <!--  参考电平 -->
@@ -417,7 +417,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '参考电平')" />
+        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" />
       </detail-block>
 
       <!--  垂直刻度（显示位置从上到下） -->
@@ -427,7 +427,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '垂直刻度')" />
+        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" />
       </detail-block>
 
       <!--  输入频响 -->
@@ -437,7 +437,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入频响')" />
+        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" />
       </detail-block>
 
       <!--  平均噪声电平 -->
@@ -447,7 +447,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '平均噪声电平')" />
+        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" />
       </detail-block>
 
       <!--  谐波失真 -->
@@ -457,7 +457,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '谐波失真')" />
+        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" />
       </detail-block>
 
       <!--  输入衰减 -->
@@ -467,7 +467,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入衰减')" />
+        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" />
       </detail-block>
 
       <!--  1dB增益压缩点 -->
@@ -477,7 +477,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '1dB增益压缩点')" />
+        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" />
       </detail-block>
 
       <!-- 历史修改记录 -->

diff --git a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
index 349b091..e4d1547 100644
--- a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
+++ b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
@@ -378,7 +378,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频率显示')" />
+        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" />
       </detail-block>
       <!-- 扫频宽度 -->
       <detail-block title="扫频宽度">
@@ -387,7 +387,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '扫频宽度')" />
+        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽 -->
@@ -397,7 +397,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽')" />
+        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽转换偏差 -->
@@ -407,7 +407,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽转换偏差')" />
+        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" />
       </detail-block>
 
       <!--  参考电平 -->
@@ -417,7 +417,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '参考电平')" />
+        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" />
       </detail-block>
 
       <!--  垂直刻度（显示位置从上到下） -->
@@ -427,7 +427,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '垂直刻度')" />
+        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" />
       </detail-block>
 
       <!--  输入频响 -->
@@ -437,7 +437,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入频响')" />
+        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" />
       </detail-block>
 
       <!--  平均噪声电平 -->
@@ -447,7 +447,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '平均噪声电平')" />
+        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" />
       </detail-block>
 
       <!--  谐波失真 -->
@@ -457,7 +457,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '谐波失真')" />
+        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" />
       </detail-block>
 
       <!--  输入衰减 -->
@@ -467,7 +467,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入衰减')" />
+        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" />
       </detail-block>
 
       <!--  1dB增益压缩点 -->
@@ -477,7 +477,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '1dB增益压缩点')" />
+        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" />
       </detail-block>
 
       <!-- 历史修改记录 -->
diff --git a/src/views/business/taskMeasure/measureData/components/second/second-interface.ts b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
new file mode 100644
index 0000000..9311317
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
@@ -0,0 +1,5 @@
+// 检定项数据表格
+export interface IDetailMeasureList {
+  id: string
+
+}

diff --git a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
index 349b091..e4d1547 100644
--- a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
+++ b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
@@ -378,7 +378,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频率显示')" />
+        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" />
       </detail-block>
       <!-- 扫频宽度 -->
       <detail-block title="扫频宽度">
@@ -387,7 +387,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '扫频宽度')" />
+        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽 -->
@@ -397,7 +397,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽')" />
+        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽转换偏差 -->
@@ -407,7 +407,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽转换偏差')" />
+        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" />
       </detail-block>
 
       <!--  参考电平 -->
@@ -417,7 +417,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '参考电平')" />
+        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" />
       </detail-block>
 
       <!--  垂直刻度（显示位置从上到下） -->
@@ -427,7 +427,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '垂直刻度')" />
+        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" />
       </detail-block>
 
       <!--  输入频响 -->
@@ -437,7 +437,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入频响')" />
+        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" />
       </detail-block>
 
       <!--  平均噪声电平 -->
@@ -447,7 +447,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '平均噪声电平')" />
+        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" />
       </detail-block>
 
       <!--  谐波失真 -->
@@ -457,7 +457,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '谐波失真')" />
+        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" />
       </detail-block>
 
       <!--  输入衰减 -->
@@ -467,7 +467,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入衰减')" />
+        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" />
       </detail-block>
 
       <!--  1dB增益压缩点 -->
@@ -477,7 +477,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '1dB增益压缩点')" />
+        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" />
       </detail-block>
 
       <!-- 历史修改记录 -->
diff --git a/src/views/business/taskMeasure/measureData/components/second/second-interface.ts b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
new file mode 100644
index 0000000..9311317
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
@@ -0,0 +1,5 @@
+// 检定项数据表格
+export interface IDetailMeasureList {
+  id: string
+
+}
diff --git a/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue
new file mode 100644
index 0000000..09e5553
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue
@@ -0,0 +1,373 @@
+<!-- 第2套：直流稳压电源标准装置 -->
+<!-- 检定数据管理详情模板 -->
+<script lang="ts" setup name="MeasureDataTemplateDetail">
+import { ref } from 'vue'
+import { ElLoading, ElMessage } from 'element-plus'
+import dayjs from 'dayjs'
+import changeRecord from '../changeRecord.vue'
+import selectStandard from '../../dialog/selectStandardDialog.vue'
+import TemplateFormAndTable from '../templateFormAndTable.vue'
+import { useSolveFormData } from '../useSolveFormData'
+import type { IDetailMeasureList } from './second-interface'
+import templateTable from './templateTable.vue'
+import useUserStore from '@/store/modules/user'
+import type { dictType } from '@/global'
+import { getDictByCode } from '@/api/system/dict'
+import type { TableColumn } from '@/components/NormalTable/table_interface'
+import { calculateHandle, getInfo } from '@/api/business/taskMeasure/measureData'
+import { getInfo as getItemInfo } from '@/api/business/measure/item'
+import { useCheckList } from '@/commonMethods/useCheckList'
+import { calc } from '@/utils/useCalc'
+
+const props = defineProps({
+  infoId: String, // id
+  dataNo: String, // 检定数据编号
+})
+const emits = defineEmits(['giveInfoId'])
+const user = useUserStore() // 用户信息
+const $router = useRouter() // 关闭页面使用
+const $route = useRoute() // 路由参数
+const ruleFormRef = ref() // 表单ref
+const templateFormAndTableRef = ref() // 表单和被检设备、测量设备表格公共组件ref
+const itemFormData = ref({ // 有关于检定项的数据
+  itemId: '', // 检定项id
+  itemCategoryName: '', // 设备检定项分类名称
+  itemCategoryId: '', // 设备检定项分类名称id
+  belongStandardEquipment: '', // 标准装置code
+  belongStandardEquipmentName: '', // 标准装置名称
+  appearance: '正常', // 外观（1/0）
+})
+// -------------------------------------------路由参数------------------------------------------
+const pageType = ref('add') // 页面类型: add, edit, detail
+const infoId = ref('') // 列表id
+if ($route.params && $route.params.type) {
+  pageType.value = $route.params.type as string
+
+  if ($route.params.id) {
+    infoId.value = $route.params.id as string
+  }
+}
+
+// ------------------------------------------标签----------------------------------------------------------
+const radioMenus = ref([ // 标签内容
+  { name: '检定数据', value: 'measure-data' },
+  { name: '历史修改记录', value: 'change-record' },
+])
+const current = ref('measure-data') // 选择的tab 默认基本信息
+
+// ---------------------------------------检定项数据表格----------------------------------------------------
+const lineVoltageRegulationList = ref<IDetailMeasureList[]>([]) // 电源电压调整率
+const loadRegulationList = ref<IDetailMeasureList[]>([]) // 负载调整率
+const voltageRepresentationValueErrorList = ref<IDetailMeasureList[]>([]) // 电压表示值误差
+const ammeterDirectList = ref<IDetailMeasureList[]>([]) // 电流表示值误差（直接测量）
+const ammeterIndirectList = ref<IDetailMeasureList[]>([]) // 电流表示值误差（间接测量）
+const rippleVoltageList = ref<IDetailMeasureList[]>([]) // 纹波电压
+const outputVoltageStabilityList = ref<IDetailMeasureList[]>([]) // 输出电压短期稳定性
+
+const columns_line_voltage_regulation = ref<TableColumn[]>([ // 电源电压调整率
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '调压器输出值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压最大差值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '电源电压调整率', value: 'nominalValue', align: 'center', required: true },
+])
+
+const columns_load_regulation = ref<TableColumn[]>([ // 负载调整率
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '负载情况', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '电压差值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '负载调整率', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 电压表示值误差
+const columns_voltage_representation_value_error = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检表示值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准值', value: 'nominalValue', align: 'center', required: true },
+  { text: '最大允许误差', value: 'nominalValue', align: 'center', required: true },
+  { text: '绝对误差', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 电流表示值误差（间接测量）
+const columns_ammeter_indirect = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检表示值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准值', value: 'nominalValue', align: 'center', required: true },
+  { text: '最大允许误差', value: 'nominalValue', align: 'center', required: true },
+  { text: '绝对误差', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 纹波电压
+const columns_ripple_voltage = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '纹波电压', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 输出电压短期稳定性
+const columns_output_voltage_stability = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被测电源输出电压', value: 'nominalValue', align: 'center', required: true },
+  { text: '输出电压最大变化值', value: 'nominalValue', align: 'center', required: true },
+  { text: '仪器技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '短期稳定性', value: 'nominalValue', align: 'center', required: true },
+])
+// -------------------------------------------获取详情信息--------------------------------------------------
+// 获取页面详情信息
+const fetchInfo = () => {
+  const loading = ElLoading.service({
+    lock: true,
+    background: 'rgba(255, 255, 255, 0.8)',
+  })
+  getInfo({
+    id: infoId.value,
+    belongStandardEquipment: itemFormData.value.belongStandardEquipment,
+    // 我的任务跳转过来如果已经配置过检定项了，到编辑页面，且用一下三个字段替代传id请求详情
+    itemId: $route.query.itemId, // 检定项id
+    orderId: $route.query.orderId, // 任务单id
+    sampleId: $route.query.sampleId, // 被检设备id
+  }).then((res) => {
+    // 有关于检定项的数据
+    itemFormData.value.itemId = res.data.itemId // 检定项id
+    itemFormData.value.itemCategoryName = res.data.itemCategoryName // 设备检定项分类名称
+    itemFormData.value.itemCategoryId = res.data.itemCategoryId ? res.data.itemCategoryId : itemFormData.value.itemCategoryId // 设备检定项分类名称id
+    itemFormData.value.appearance = `${res.data.appearance}` // 外观（1/0）
+
+    // =======================================表单公共组件数据处理=======================================================
+    useSolveFormData(res, templateFormAndTableRef.value)
+    // ==================================检定数据========================================================================
+
+    // list.value = res.data.measureDataPistonGaugeList.map((item: IDetailMeasureList) => {
+    //   return {
+    //     ...item,
+    //     editable: pageType.value !== 'detail',
+    //   }
+    // }) // 检定数据
+
+    infoId.value = res.data.id
+    emits('giveInfoId', infoId.value)
+    loading.close()
+  })
+}
+
+// 初始化输入数据
+const initInputData = (data: any) => {
+
+}
+
+/**
+ * 新增的时候获取检定项输入数据(获取检定项分类详情)
+ * @param itemId  检定项id
+ * @param itemCategoryName 检定项分类名字
+ * @param belongStandardEquipment 检校标准装置字典
+ */
+const fetchItemInfo = (itemId: string, itemCategoryName: string, belongStandardEquipment = '') => {
+  const params = {
+    id: itemId,
+    itemCategoryName, // 检定项分类名字
+    belongStandardEquipment, // 检校标准装置字典code
+  }
+  getItemInfo(params).then((res) => {
+    itemFormData.value.appearance = res.data.measureItemConfigPistonGauge.appearance ? '1' : '' // 外观及功能检查 1有外观，2没有外观
+    initInputData(res.data.measureItemDataPistonGaugeList)
+  })
+}
+
+// ----------------------------------------点击保存时校验---------------------------------------
+// 校验
+const checkout = () => {
+}
+// -----------------------------------------生成结果处理----------------------------------------
+// 点击计算结果
+const calculate = () => {
+  // ElMessage.info('敬请期待')
+  return false
+  // if (!list.value.length) {
+  //   ElMessage.warning('没有检定项数据，无法生成结果')
+  //   return false
+  // }
+  // if (!useCheckList(list.value, measureColumns.value, '检定数据')) {
+  //   return false
+  // }
+  // const params = {
+  //   belongStandardEquipment: itemFormData.value.belongStandardEquipment, // 检校标准装置
+  //   itemCategoryName: itemFormData.value.itemCategoryName, // 检定项分类名称
+  //   measureDataCalibratorList: list.value,
+  // }
+  // calculateHandle(params).then((res) => {
+  //   if (res.data && res.data.length) {
+  //     resultList.value = res.data.map((item: IDetailMeasureList) => {
+  //       return {
+  //         ...item,
+  //       }
+  //     }) // 检定数据
+  //   }
+  //   else {
+  //     list.value = res.data
+  //   }
+  // })
+}
+
+// ------------------------------------------钩子----------------------------------------------
+
+watch(() => props.infoId, (newValue) => {
+  if (newValue) {
+    infoId.value = newValue
+  }
+}, { immediate: true })
+
+onMounted(() => {
+  if (pageType.value === 'add') { // 从我的任务跳转过来（新增）
+    itemFormData.value.itemId = $route.query.itemId as string// 检定项id
+    itemFormData.value.itemCategoryName = $route.query.itemCategoryName as string// 设备检定项分类名称
+    itemFormData.value.itemCategoryId = $route.query.itemCategoryId as string// 设备检定项分类名称id
+    itemFormData.value.belongStandardEquipment = $route.query.belongStandardEquipment as string// 标准装置code
+    itemFormData.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string// 标准装置名称
+    // 查输入值(查检定项管理的详情)
+    // fetchItemInfo($route.query.itemId! as string, $route.query.itemCategoryName! as string, $route.query.belongStandardEquipment as string)
+  }
+  else {
+    itemFormData.value.itemCategoryName = $route.query.itemCategoryName as string // 设备检定项分类名称
+    itemFormData.value.itemCategoryId = $route.query.itemCategoryId as string// 设备检定项分类名称id
+    itemFormData.value.belongStandardEquipment = $route.query.belongStandardEquipment as string// 标准装置code
+    itemFormData.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string// 标准装置名称
+    // fetchInfo()
+  }
+})
+
+defineExpose({ checkout, itemFormData, templateFormAndTableRef, pageType })
+</script>
+
+<template>
+  <div class="measure-data-template-detail">
+    <template-form-and-table ref="templateFormAndTableRef" :page-type="pageType" />
+    <!-- 标签 -->
+    <detail-block :title="pageType !== 'detail' ? '检定数据' : ''" :class="pageType === 'detail' ? 'setBottom' : ''">
+      <el-radio-group v-if="pageType === 'detail'" v-model="current">
+        <el-radio-button v-for="item in radioMenus" :key="item.value" :label="item.value">
+          {{ item.name }}
+        </el-radio-button>
+      </el-radio-group>
+
+      <el-form
+        v-if="current === 'measure-data'"
+        ref="formRef"
+        :model="itemFormData"
+        label-width="140"
+        label-position="right"
+        style="margin-top: 20px;"
+      >
+        <el-row>
+          <!-- 外观  -->
+          <el-col :span="12">
+            <el-form-item label="外观及功能性检查:" prop="appearance">
+              <el-input
+                v-model="itemFormData.appearance"
+                class="full-width-input"
+                autosize
+                type="textarea"
+                :disabled="pageType === 'detail'"
+              />
+            </el-form-item>
+          </el-col>
+        </el-row>
+      </el-form>
+
+      <!-- 电源电压调整率 -->
+      <detail-block title="电源电压调整率">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="lineVoltageRegulationList" :columns="columns_line_voltage_regulation" :page-type="pageType" />
+      </detail-block>
+      <!-- 负载调整率 -->
+      <detail-block title="负载调整率">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="loadRegulationList" :columns="columns_load_regulation" :page-type="pageType" />
+      </detail-block>
+
+      <!--  电压表示值误差 -->
+      <detail-block title=" 电压表示值误差">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="voltageRepresentationValueErrorList" :columns="columns_voltage_representation_value_error" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 电流表示值误差（直接测量） -->
+      <detail-block title="电流表示值误差（直接测量）">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="ammeterDirectList" :columns="columns_voltage_representation_value_error" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 电流表示值误差（间接测量） -->
+      <detail-block title="电流表示值误差（间接测量）">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="ammeterIndirectList" :columns="columns_ammeter_indirect" :page-type="pageType" />
+      </detail-block>
+
+      <!--  纹波电压 -->
+      <detail-block title="纹波电压">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="rippleVoltageList" :columns="columns_ripple_voltage" :page-type="pageType" />
+      </detail-block>
+
+      <!--  输出电压短期稳定性 -->
+      <detail-block title="输出电压短期稳定性">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="outputVoltageStabilityList" :columns="columns_output_voltage_stability" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 历史修改记录 -->
+      <change-record v-show="pageType === 'detail' && current === 'change-record'" :info-id="infoId" />
+    </detail-block>
+  </div>
+</template>
+
+<style lang="scss">
+.measure-data-template-detail {
+  .el-radio__label {
+    display: block !important;
+  }
+}
+</style>

diff --git a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
index 349b091..e4d1547 100644
--- a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
+++ b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
@@ -378,7 +378,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频率显示')" />
+        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" />
       </detail-block>
       <!-- 扫频宽度 -->
       <detail-block title="扫频宽度">
@@ -387,7 +387,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '扫频宽度')" />
+        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽 -->
@@ -397,7 +397,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽')" />
+        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽转换偏差 -->
@@ -407,7 +407,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽转换偏差')" />
+        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" />
       </detail-block>
 
       <!--  参考电平 -->
@@ -417,7 +417,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '参考电平')" />
+        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" />
       </detail-block>
 
       <!--  垂直刻度（显示位置从上到下） -->
@@ -427,7 +427,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '垂直刻度')" />
+        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" />
       </detail-block>
 
       <!--  输入频响 -->
@@ -437,7 +437,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入频响')" />
+        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" />
       </detail-block>
 
       <!--  平均噪声电平 -->
@@ -447,7 +447,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '平均噪声电平')" />
+        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" />
       </detail-block>
 
       <!--  谐波失真 -->
@@ -457,7 +457,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '谐波失真')" />
+        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" />
       </detail-block>
 
       <!--  输入衰减 -->
@@ -467,7 +467,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入衰减')" />
+        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" />
       </detail-block>
 
       <!--  1dB增益压缩点 -->
@@ -477,7 +477,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '1dB增益压缩点')" />
+        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" />
       </detail-block>
 
       <!-- 历史修改记录 -->
diff --git a/src/views/business/taskMeasure/measureData/components/second/second-interface.ts b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
new file mode 100644
index 0000000..9311317
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
@@ -0,0 +1,5 @@
+// 检定项数据表格
+export interface IDetailMeasureList {
+  id: string
+
+}
diff --git a/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue
new file mode 100644
index 0000000..09e5553
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue
@@ -0,0 +1,373 @@
+<!-- 第2套：直流稳压电源标准装置 -->
+<!-- 检定数据管理详情模板 -->
+<script lang="ts" setup name="MeasureDataTemplateDetail">
+import { ref } from 'vue'
+import { ElLoading, ElMessage } from 'element-plus'
+import dayjs from 'dayjs'
+import changeRecord from '../changeRecord.vue'
+import selectStandard from '../../dialog/selectStandardDialog.vue'
+import TemplateFormAndTable from '../templateFormAndTable.vue'
+import { useSolveFormData } from '../useSolveFormData'
+import type { IDetailMeasureList } from './second-interface'
+import templateTable from './templateTable.vue'
+import useUserStore from '@/store/modules/user'
+import type { dictType } from '@/global'
+import { getDictByCode } from '@/api/system/dict'
+import type { TableColumn } from '@/components/NormalTable/table_interface'
+import { calculateHandle, getInfo } from '@/api/business/taskMeasure/measureData'
+import { getInfo as getItemInfo } from '@/api/business/measure/item'
+import { useCheckList } from '@/commonMethods/useCheckList'
+import { calc } from '@/utils/useCalc'
+
+const props = defineProps({
+  infoId: String, // id
+  dataNo: String, // 检定数据编号
+})
+const emits = defineEmits(['giveInfoId'])
+const user = useUserStore() // 用户信息
+const $router = useRouter() // 关闭页面使用
+const $route = useRoute() // 路由参数
+const ruleFormRef = ref() // 表单ref
+const templateFormAndTableRef = ref() // 表单和被检设备、测量设备表格公共组件ref
+const itemFormData = ref({ // 有关于检定项的数据
+  itemId: '', // 检定项id
+  itemCategoryName: '', // 设备检定项分类名称
+  itemCategoryId: '', // 设备检定项分类名称id
+  belongStandardEquipment: '', // 标准装置code
+  belongStandardEquipmentName: '', // 标准装置名称
+  appearance: '正常', // 外观（1/0）
+})
+// -------------------------------------------路由参数------------------------------------------
+const pageType = ref('add') // 页面类型: add, edit, detail
+const infoId = ref('') // 列表id
+if ($route.params && $route.params.type) {
+  pageType.value = $route.params.type as string
+
+  if ($route.params.id) {
+    infoId.value = $route.params.id as string
+  }
+}
+
+// ------------------------------------------标签----------------------------------------------------------
+const radioMenus = ref([ // 标签内容
+  { name: '检定数据', value: 'measure-data' },
+  { name: '历史修改记录', value: 'change-record' },
+])
+const current = ref('measure-data') // 选择的tab 默认基本信息
+
+// ---------------------------------------检定项数据表格----------------------------------------------------
+const lineVoltageRegulationList = ref<IDetailMeasureList[]>([]) // 电源电压调整率
+const loadRegulationList = ref<IDetailMeasureList[]>([]) // 负载调整率
+const voltageRepresentationValueErrorList = ref<IDetailMeasureList[]>([]) // 电压表示值误差
+const ammeterDirectList = ref<IDetailMeasureList[]>([]) // 电流表示值误差（直接测量）
+const ammeterIndirectList = ref<IDetailMeasureList[]>([]) // 电流表示值误差（间接测量）
+const rippleVoltageList = ref<IDetailMeasureList[]>([]) // 纹波电压
+const outputVoltageStabilityList = ref<IDetailMeasureList[]>([]) // 输出电压短期稳定性
+
+const columns_line_voltage_regulation = ref<TableColumn[]>([ // 电源电压调整率
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '调压器输出值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压最大差值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '电源电压调整率', value: 'nominalValue', align: 'center', required: true },
+])
+
+const columns_load_regulation = ref<TableColumn[]>([ // 负载调整率
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '负载情况', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '电压差值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '负载调整率', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 电压表示值误差
+const columns_voltage_representation_value_error = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检表示值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准值', value: 'nominalValue', align: 'center', required: true },
+  { text: '最大允许误差', value: 'nominalValue', align: 'center', required: true },
+  { text: '绝对误差', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 电流表示值误差（间接测量）
+const columns_ammeter_indirect = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检表示值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准值', value: 'nominalValue', align: 'center', required: true },
+  { text: '最大允许误差', value: 'nominalValue', align: 'center', required: true },
+  { text: '绝对误差', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 纹波电压
+const columns_ripple_voltage = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '纹波电压', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 输出电压短期稳定性
+const columns_output_voltage_stability = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被测电源输出电压', value: 'nominalValue', align: 'center', required: true },
+  { text: '输出电压最大变化值', value: 'nominalValue', align: 'center', required: true },
+  { text: '仪器技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '短期稳定性', value: 'nominalValue', align: 'center', required: true },
+])
+// -------------------------------------------获取详情信息--------------------------------------------------
+// 获取页面详情信息
+const fetchInfo = () => {
+  const loading = ElLoading.service({
+    lock: true,
+    background: 'rgba(255, 255, 255, 0.8)',
+  })
+  getInfo({
+    id: infoId.value,
+    belongStandardEquipment: itemFormData.value.belongStandardEquipment,
+    // 我的任务跳转过来如果已经配置过检定项了，到编辑页面，且用一下三个字段替代传id请求详情
+    itemId: $route.query.itemId, // 检定项id
+    orderId: $route.query.orderId, // 任务单id
+    sampleId: $route.query.sampleId, // 被检设备id
+  }).then((res) => {
+    // 有关于检定项的数据
+    itemFormData.value.itemId = res.data.itemId // 检定项id
+    itemFormData.value.itemCategoryName = res.data.itemCategoryName // 设备检定项分类名称
+    itemFormData.value.itemCategoryId = res.data.itemCategoryId ? res.data.itemCategoryId : itemFormData.value.itemCategoryId // 设备检定项分类名称id
+    itemFormData.value.appearance = `${res.data.appearance}` // 外观（1/0）
+
+    // =======================================表单公共组件数据处理=======================================================
+    useSolveFormData(res, templateFormAndTableRef.value)
+    // ==================================检定数据========================================================================
+
+    // list.value = res.data.measureDataPistonGaugeList.map((item: IDetailMeasureList) => {
+    //   return {
+    //     ...item,
+    //     editable: pageType.value !== 'detail',
+    //   }
+    // }) // 检定数据
+
+    infoId.value = res.data.id
+    emits('giveInfoId', infoId.value)
+    loading.close()
+  })
+}
+
+// 初始化输入数据
+const initInputData = (data: any) => {
+
+}
+
+/**
+ * 新增的时候获取检定项输入数据(获取检定项分类详情)
+ * @param itemId  检定项id
+ * @param itemCategoryName 检定项分类名字
+ * @param belongStandardEquipment 检校标准装置字典
+ */
+const fetchItemInfo = (itemId: string, itemCategoryName: string, belongStandardEquipment = '') => {
+  const params = {
+    id: itemId,
+    itemCategoryName, // 检定项分类名字
+    belongStandardEquipment, // 检校标准装置字典code
+  }
+  getItemInfo(params).then((res) => {
+    itemFormData.value.appearance = res.data.measureItemConfigPistonGauge.appearance ? '1' : '' // 外观及功能检查 1有外观，2没有外观
+    initInputData(res.data.measureItemDataPistonGaugeList)
+  })
+}
+
+// ----------------------------------------点击保存时校验---------------------------------------
+// 校验
+const checkout = () => {
+}
+// -----------------------------------------生成结果处理----------------------------------------
+// 点击计算结果
+const calculate = () => {
+  // ElMessage.info('敬请期待')
+  return false
+  // if (!list.value.length) {
+  //   ElMessage.warning('没有检定项数据，无法生成结果')
+  //   return false
+  // }
+  // if (!useCheckList(list.value, measureColumns.value, '检定数据')) {
+  //   return false
+  // }
+  // const params = {
+  //   belongStandardEquipment: itemFormData.value.belongStandardEquipment, // 检校标准装置
+  //   itemCategoryName: itemFormData.value.itemCategoryName, // 检定项分类名称
+  //   measureDataCalibratorList: list.value,
+  // }
+  // calculateHandle(params).then((res) => {
+  //   if (res.data && res.data.length) {
+  //     resultList.value = res.data.map((item: IDetailMeasureList) => {
+  //       return {
+  //         ...item,
+  //       }
+  //     }) // 检定数据
+  //   }
+  //   else {
+  //     list.value = res.data
+  //   }
+  // })
+}
+
+// ------------------------------------------钩子----------------------------------------------
+
+watch(() => props.infoId, (newValue) => {
+  if (newValue) {
+    infoId.value = newValue
+  }
+}, { immediate: true })
+
+onMounted(() => {
+  if (pageType.value === 'add') { // 从我的任务跳转过来（新增）
+    itemFormData.value.itemId = $route.query.itemId as string// 检定项id
+    itemFormData.value.itemCategoryName = $route.query.itemCategoryName as string// 设备检定项分类名称
+    itemFormData.value.itemCategoryId = $route.query.itemCategoryId as string// 设备检定项分类名称id
+    itemFormData.value.belongStandardEquipment = $route.query.belongStandardEquipment as string// 标准装置code
+    itemFormData.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string// 标准装置名称
+    // 查输入值(查检定项管理的详情)
+    // fetchItemInfo($route.query.itemId! as string, $route.query.itemCategoryName! as string, $route.query.belongStandardEquipment as string)
+  }
+  else {
+    itemFormData.value.itemCategoryName = $route.query.itemCategoryName as string // 设备检定项分类名称
+    itemFormData.value.itemCategoryId = $route.query.itemCategoryId as string// 设备检定项分类名称id
+    itemFormData.value.belongStandardEquipment = $route.query.belongStandardEquipment as string// 标准装置code
+    itemFormData.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string// 标准装置名称
+    // fetchInfo()
+  }
+})
+
+defineExpose({ checkout, itemFormData, templateFormAndTableRef, pageType })
+</script>
+
+<template>
+  <div class="measure-data-template-detail">
+    <template-form-and-table ref="templateFormAndTableRef" :page-type="pageType" />
+    <!-- 标签 -->
+    <detail-block :title="pageType !== 'detail' ? '检定数据' : ''" :class="pageType === 'detail' ? 'setBottom' : ''">
+      <el-radio-group v-if="pageType === 'detail'" v-model="current">
+        <el-radio-button v-for="item in radioMenus" :key="item.value" :label="item.value">
+          {{ item.name }}
+        </el-radio-button>
+      </el-radio-group>
+
+      <el-form
+        v-if="current === 'measure-data'"
+        ref="formRef"
+        :model="itemFormData"
+        label-width="140"
+        label-position="right"
+        style="margin-top: 20px;"
+      >
+        <el-row>
+          <!-- 外观  -->
+          <el-col :span="12">
+            <el-form-item label="外观及功能性检查:" prop="appearance">
+              <el-input
+                v-model="itemFormData.appearance"
+                class="full-width-input"
+                autosize
+                type="textarea"
+                :disabled="pageType === 'detail'"
+              />
+            </el-form-item>
+          </el-col>
+        </el-row>
+      </el-form>
+
+      <!-- 电源电压调整率 -->
+      <detail-block title="电源电压调整率">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="lineVoltageRegulationList" :columns="columns_line_voltage_regulation" :page-type="pageType" />
+      </detail-block>
+      <!-- 负载调整率 -->
+      <detail-block title="负载调整率">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="loadRegulationList" :columns="columns_load_regulation" :page-type="pageType" />
+      </detail-block>
+
+      <!--  电压表示值误差 -->
+      <detail-block title=" 电压表示值误差">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="voltageRepresentationValueErrorList" :columns="columns_voltage_representation_value_error" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 电流表示值误差（直接测量） -->
+      <detail-block title="电流表示值误差（直接测量）">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="ammeterDirectList" :columns="columns_voltage_representation_value_error" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 电流表示值误差（间接测量） -->
+      <detail-block title="电流表示值误差（间接测量）">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="ammeterIndirectList" :columns="columns_ammeter_indirect" :page-type="pageType" />
+      </detail-block>
+
+      <!--  纹波电压 -->
+      <detail-block title="纹波电压">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="rippleVoltageList" :columns="columns_ripple_voltage" :page-type="pageType" />
+      </detail-block>
+
+      <!--  输出电压短期稳定性 -->
+      <detail-block title="输出电压短期稳定性">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="outputVoltageStabilityList" :columns="columns_output_voltage_stability" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 历史修改记录 -->
+      <change-record v-show="pageType === 'detail' && current === 'change-record'" :info-id="infoId" />
+    </detail-block>
+  </div>
+</template>
+
+<style lang="scss">
+.measure-data-template-detail {
+  .el-radio__label {
+    display: block !important;
+  }
+}
+</style>
diff --git a/src/views/business/taskMeasure/measureData/components/second/templateTable.vue b/src/views/business/taskMeasure/measureData/components/second/templateTable.vue
new file mode 100644
index 0000000..f7de3bf
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/templateTable.vue
@@ -0,0 +1,172 @@
+<script lang="ts" setup name="NonthTemplateTable">
+import type { Ref } from 'vue'
+import { ElTable } from 'element-plus'
+import { defineExpose, ref } from 'vue'
+import type { TableColumn } from '@/components/NormalTable/table_interface'
+import { getDictByCode } from '@/api/system/dict'
+import type { dictType } from '@/global'
+
+// ------------------定义props、 emit-------------------
+const props = defineProps({
+  pageType: {
+    type: String,
+    default: 'detail',
+  },
+  // 数据
+  data: {
+    type: Array,
+    default() {
+      return []
+    },
+  },
+  // 表格高度
+  height: {
+    type: Number,
+    default() {
+      return null
+    },
+  },
+  // 数据列配置
+  columns: {
+    type: Array<TableColumn>,
+    default() {
+      return () => []
+    },
+  },
+  // 表格大小
+  size: {
+    type: String,
+    default: 'default',
+  }, // 表格大小，默认，small,mini等，与el-table条件相同
+})
+const emit = defineEmits(['change', 'selectionChange', 'rowClick', 'rowDbClick', 'multiSelect', 'filterChange'])
+// ------------------------------------------字典----------------------------------------------
+const paramsList = ref<dictType[]>([]) // 参数
+
+/**
+ * 获取字典
+ */
+function getDict() {
+  // 参数
+  getDictByCode('bizFirstStandardParams').then((response) => {
+    paramsList.value = response.data
+  })
+}
+
+// getDict()
+// -------定义数据--------------
+interface columnsCheckInfo {
+  text: string
+  show: boolean
+}
+const columnsChecked: Ref<columnsCheckInfo[]> = ref([])
+const table = ref<InstanceType<typeof ElTable>>()
+const singleChecked = ref('') // 单选选中id
+// 初始化列显示状态
+function initColumnsState() {
+  columnsChecked.value = []
+  for (const column of props.columns) {
+    columnsChecked.value.push({ text: column.text, show: !!column.show })
+  }
+}
+
+// 最终展示列
+const columnsFiltered: Ref<TableColumn[]> = ref([])
+// 切换列
+function changeColumns() {
+  columnsFiltered.value = []
+  for (const i in props.columns) {
+    if (columnsChecked.value[i].show === true) {
+      columnsFiltered.value.push(props.columns[i])
+    }
+  }
+}
+// 刷新
+function refresh() {
+  emit('change')
+}
+
+// 多选选中结果
+function selectionChange(selection: []) {
+  emit('selectionChange', selection)
+}
+// 点击行
+function rowClick(row: object, column?: any, event?: any) {
+  emit('rowClick', row)
+}
+// 双击行
+function rowDbClick(row: object, column?: any, event?: any) {
+  emit('rowDbClick', row)
+}
+// 监听columns
+watch(props.columns, (val) => {
+  initColumnsState()
+  changeColumns()
+})
+// 多选
+const handleSelectionChange = (val: any) => {
+  emit('multiSelect', val)
+}
+// 清除多选选中
+const clearMulti = () => {
+  console.log('清理选中')
+  table.value!.clearSelection()
+  singleChecked.value = ''
+}
+defineExpose({
+  clearMulti, initColumnsState,
+})
+onBeforeMount(() => {
+  initColumnsState()
+  changeColumns()
+})
+</script>
+
+<template>
+  <el-table
+    id="print"
+    ref="table"
+    :data="data"
+    :height="height"
+    border
+    stripe
+    :size="size"
+    style="width: 100%;"
+    @selection-change="handleSelectionChange"
+    @row-click="rowClick"
+    @row-dblclick="rowDbClick"
+  >
+    <!-- <el-table-column v-if="pageType !== 'detail'" type="selection" width="38" /> -->
+    <el-table-column align="center" label="序号" width="80" type="index" />
+    <el-table-column
+      v-for="item in columns"
+      :key="item.value"
+      :prop="item.value"
+      :label="item.text"
+      :width="item.width"
+      align="center"
+    >
+      <template #header>
+        <span v-show="item.required" style="color: red;">*</span><span>{{ item.text }}</span>
+      </template>
+    </el-table-column>
+  </el-table>
+</template>
+
+<style lang="scss" scoped>
+.single-table {
+  width: 100%;
+
+  :deep(.el-table th.el-table__cell:nth-child(1) .cell) {
+    visibility: hidden;
+  }
+}
+</style>
+
+<style lang="scss">
+.normal-table {
+  .el-radio__label {
+    display: none !important;
+  }
+}
+</style>

diff --git a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
index 349b091..e4d1547 100644
--- a/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
+++ b/src/views/business/taskMeasure/measureData/components/ninth/templateDetail.vue
@@ -378,7 +378,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '频率显示')" />
+        <template-table :data="frequencyList" :columns="columns_frequency" :page-type="pageType" />
       </detail-block>
       <!-- 扫频宽度 -->
       <detail-block title="扫频宽度">
@@ -387,7 +387,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '扫频宽度')" />
+        <template-table :data="sweepWidthList" :columns="columns_sweep_width" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽 -->
@@ -397,7 +397,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽')" />
+        <template-table :data="intermediateFrequencyBandwidthList" :columns="columns_intermediate_frequency_bandwidth" :page-type="pageType" />
       </detail-block>
 
       <!-- 中频带宽转换偏差 -->
@@ -407,7 +407,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '中频带宽转换偏差')" />
+        <template-table :data="transitionDeviationList" :columns="columns_transition_deviation" :page-type="pageType" />
       </detail-block>
 
       <!--  参考电平 -->
@@ -417,7 +417,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '参考电平')" />
+        <template-table :data="referenceElectricalLevelList" :columns="columns_reference_electrical_level" :page-type="pageType" />
       </detail-block>
 
       <!--  垂直刻度（显示位置从上到下） -->
@@ -427,7 +427,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '垂直刻度')" />
+        <template-table :data="verticalGraduatedList" :columns="columns_vertical_graduated" :page-type="pageType" />
       </detail-block>
 
       <!--  输入频响 -->
@@ -437,7 +437,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入频响')" />
+        <template-table :data="inputFrequencyResponseList" :columns="columns_input_frequency_response" :page-type="pageType" />
       </detail-block>
 
       <!--  平均噪声电平 -->
@@ -447,7 +447,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '平均噪声电平')" />
+        <template-table :data="averageNoiseLevelList" :columns="columns_average_noise_level" :page-type="pageType" />
       </detail-block>
 
       <!--  谐波失真 -->
@@ -457,7 +457,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '谐波失真')" />
+        <template-table :data="harmonicDistortionList" :columns="columns_harmonic_distortion" :page-type="pageType" />
       </detail-block>
 
       <!--  输入衰减 -->
@@ -467,7 +467,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '输入衰减')" />
+        <template-table :data="inputAttenuatorList" :columns="columns_input_attenuator" :page-type="pageType" />
       </detail-block>
 
       <!--  1dB增益压缩点 -->
@@ -477,7 +477,7 @@
             计算结果
           </el-button>
         </template>
-        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" @selection-change="(e) => handleSelectionChange(e, '1dB增益压缩点')" />
+        <template-table :data="gainCompressionPointList" :columns="columns_gain_compression_point" :page-type="pageType" />
       </detail-block>
 
       <!-- 历史修改记录 -->
diff --git a/src/views/business/taskMeasure/measureData/components/second/second-interface.ts b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
new file mode 100644
index 0000000..9311317
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/second-interface.ts
@@ -0,0 +1,5 @@
+// 检定项数据表格
+export interface IDetailMeasureList {
+  id: string
+
+}
diff --git a/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue b/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue
new file mode 100644
index 0000000..09e5553
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/templateDetail.vue
@@ -0,0 +1,373 @@
+<!-- 第2套：直流稳压电源标准装置 -->
+<!-- 检定数据管理详情模板 -->
+<script lang="ts" setup name="MeasureDataTemplateDetail">
+import { ref } from 'vue'
+import { ElLoading, ElMessage } from 'element-plus'
+import dayjs from 'dayjs'
+import changeRecord from '../changeRecord.vue'
+import selectStandard from '../../dialog/selectStandardDialog.vue'
+import TemplateFormAndTable from '../templateFormAndTable.vue'
+import { useSolveFormData } from '../useSolveFormData'
+import type { IDetailMeasureList } from './second-interface'
+import templateTable from './templateTable.vue'
+import useUserStore from '@/store/modules/user'
+import type { dictType } from '@/global'
+import { getDictByCode } from '@/api/system/dict'
+import type { TableColumn } from '@/components/NormalTable/table_interface'
+import { calculateHandle, getInfo } from '@/api/business/taskMeasure/measureData'
+import { getInfo as getItemInfo } from '@/api/business/measure/item'
+import { useCheckList } from '@/commonMethods/useCheckList'
+import { calc } from '@/utils/useCalc'
+
+const props = defineProps({
+  infoId: String, // id
+  dataNo: String, // 检定数据编号
+})
+const emits = defineEmits(['giveInfoId'])
+const user = useUserStore() // 用户信息
+const $router = useRouter() // 关闭页面使用
+const $route = useRoute() // 路由参数
+const ruleFormRef = ref() // 表单ref
+const templateFormAndTableRef = ref() // 表单和被检设备、测量设备表格公共组件ref
+const itemFormData = ref({ // 有关于检定项的数据
+  itemId: '', // 检定项id
+  itemCategoryName: '', // 设备检定项分类名称
+  itemCategoryId: '', // 设备检定项分类名称id
+  belongStandardEquipment: '', // 标准装置code
+  belongStandardEquipmentName: '', // 标准装置名称
+  appearance: '正常', // 外观（1/0）
+})
+// -------------------------------------------路由参数------------------------------------------
+const pageType = ref('add') // 页面类型: add, edit, detail
+const infoId = ref('') // 列表id
+if ($route.params && $route.params.type) {
+  pageType.value = $route.params.type as string
+
+  if ($route.params.id) {
+    infoId.value = $route.params.id as string
+  }
+}
+
+// ------------------------------------------标签----------------------------------------------------------
+const radioMenus = ref([ // 标签内容
+  { name: '检定数据', value: 'measure-data' },
+  { name: '历史修改记录', value: 'change-record' },
+])
+const current = ref('measure-data') // 选择的tab 默认基本信息
+
+// ---------------------------------------检定项数据表格----------------------------------------------------
+const lineVoltageRegulationList = ref<IDetailMeasureList[]>([]) // 电源电压调整率
+const loadRegulationList = ref<IDetailMeasureList[]>([]) // 负载调整率
+const voltageRepresentationValueErrorList = ref<IDetailMeasureList[]>([]) // 电压表示值误差
+const ammeterDirectList = ref<IDetailMeasureList[]>([]) // 电流表示值误差（直接测量）
+const ammeterIndirectList = ref<IDetailMeasureList[]>([]) // 电流表示值误差（间接测量）
+const rippleVoltageList = ref<IDetailMeasureList[]>([]) // 纹波电压
+const outputVoltageStabilityList = ref<IDetailMeasureList[]>([]) // 输出电压短期稳定性
+
+const columns_line_voltage_regulation = ref<TableColumn[]>([ // 电源电压调整率
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '调压器输出值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压最大差值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '电源电压调整率', value: 'nominalValue', align: 'center', required: true },
+])
+
+const columns_load_regulation = ref<TableColumn[]>([ // 负载调整率
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '负载情况', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源输出电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '电压差值', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '负载调整率', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 电压表示值误差
+const columns_voltage_representation_value_error = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检表示值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准值', value: 'nominalValue', align: 'center', required: true },
+  { text: '最大允许误差', value: 'nominalValue', align: 'center', required: true },
+  { text: '绝对误差', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 电流表示值误差（间接测量）
+const columns_ammeter_indirect = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检表示值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准电压值', value: 'nominalValue', align: 'center', required: true },
+  { text: '标准值', value: 'nominalValue', align: 'center', required: true },
+  { text: '最大允许误差', value: 'nominalValue', align: 'center', required: true },
+  { text: '绝对误差', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 纹波电压
+const columns_ripple_voltage = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被检电源技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '纹波电压', value: 'nominalValue', align: 'center', required: true },
+])
+
+// 输出电压短期稳定性
+const columns_output_voltage_stability = ref<TableColumn[]>([
+  { text: '检定项目', value: 'params', align: 'center', required: true },
+  { text: '输出通道', value: 'nominalValue', align: 'center', required: true },
+  { text: '单位', value: 'nominalValue', align: 'center', required: true },
+  { text: '被测电源输出电压', value: 'nominalValue', align: 'center', required: true },
+  { text: '输出电压最大变化值', value: 'nominalValue', align: 'center', required: true },
+  { text: '仪器技术指标', value: 'nominalValue', align: 'center', required: true },
+  { text: '短期稳定性', value: 'nominalValue', align: 'center', required: true },
+])
+// -------------------------------------------获取详情信息--------------------------------------------------
+// 获取页面详情信息
+const fetchInfo = () => {
+  const loading = ElLoading.service({
+    lock: true,
+    background: 'rgba(255, 255, 255, 0.8)',
+  })
+  getInfo({
+    id: infoId.value,
+    belongStandardEquipment: itemFormData.value.belongStandardEquipment,
+    // 我的任务跳转过来如果已经配置过检定项了，到编辑页面，且用一下三个字段替代传id请求详情
+    itemId: $route.query.itemId, // 检定项id
+    orderId: $route.query.orderId, // 任务单id
+    sampleId: $route.query.sampleId, // 被检设备id
+  }).then((res) => {
+    // 有关于检定项的数据
+    itemFormData.value.itemId = res.data.itemId // 检定项id
+    itemFormData.value.itemCategoryName = res.data.itemCategoryName // 设备检定项分类名称
+    itemFormData.value.itemCategoryId = res.data.itemCategoryId ? res.data.itemCategoryId : itemFormData.value.itemCategoryId // 设备检定项分类名称id
+    itemFormData.value.appearance = `${res.data.appearance}` // 外观（1/0）
+
+    // =======================================表单公共组件数据处理=======================================================
+    useSolveFormData(res, templateFormAndTableRef.value)
+    // ==================================检定数据========================================================================
+
+    // list.value = res.data.measureDataPistonGaugeList.map((item: IDetailMeasureList) => {
+    //   return {
+    //     ...item,
+    //     editable: pageType.value !== 'detail',
+    //   }
+    // }) // 检定数据
+
+    infoId.value = res.data.id
+    emits('giveInfoId', infoId.value)
+    loading.close()
+  })
+}
+
+// 初始化输入数据
+const initInputData = (data: any) => {
+
+}
+
+/**
+ * 新增的时候获取检定项输入数据(获取检定项分类详情)
+ * @param itemId  检定项id
+ * @param itemCategoryName 检定项分类名字
+ * @param belongStandardEquipment 检校标准装置字典
+ */
+const fetchItemInfo = (itemId: string, itemCategoryName: string, belongStandardEquipment = '') => {
+  const params = {
+    id: itemId,
+    itemCategoryName, // 检定项分类名字
+    belongStandardEquipment, // 检校标准装置字典code
+  }
+  getItemInfo(params).then((res) => {
+    itemFormData.value.appearance = res.data.measureItemConfigPistonGauge.appearance ? '1' : '' // 外观及功能检查 1有外观，2没有外观
+    initInputData(res.data.measureItemDataPistonGaugeList)
+  })
+}
+
+// ----------------------------------------点击保存时校验---------------------------------------
+// 校验
+const checkout = () => {
+}
+// -----------------------------------------生成结果处理----------------------------------------
+// 点击计算结果
+const calculate = () => {
+  // ElMessage.info('敬请期待')
+  return false
+  // if (!list.value.length) {
+  //   ElMessage.warning('没有检定项数据，无法生成结果')
+  //   return false
+  // }
+  // if (!useCheckList(list.value, measureColumns.value, '检定数据')) {
+  //   return false
+  // }
+  // const params = {
+  //   belongStandardEquipment: itemFormData.value.belongStandardEquipment, // 检校标准装置
+  //   itemCategoryName: itemFormData.value.itemCategoryName, // 检定项分类名称
+  //   measureDataCalibratorList: list.value,
+  // }
+  // calculateHandle(params).then((res) => {
+  //   if (res.data && res.data.length) {
+  //     resultList.value = res.data.map((item: IDetailMeasureList) => {
+  //       return {
+  //         ...item,
+  //       }
+  //     }) // 检定数据
+  //   }
+  //   else {
+  //     list.value = res.data
+  //   }
+  // })
+}
+
+// ------------------------------------------钩子----------------------------------------------
+
+watch(() => props.infoId, (newValue) => {
+  if (newValue) {
+    infoId.value = newValue
+  }
+}, { immediate: true })
+
+onMounted(() => {
+  if (pageType.value === 'add') { // 从我的任务跳转过来（新增）
+    itemFormData.value.itemId = $route.query.itemId as string// 检定项id
+    itemFormData.value.itemCategoryName = $route.query.itemCategoryName as string// 设备检定项分类名称
+    itemFormData.value.itemCategoryId = $route.query.itemCategoryId as string// 设备检定项分类名称id
+    itemFormData.value.belongStandardEquipment = $route.query.belongStandardEquipment as string// 标准装置code
+    itemFormData.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string// 标准装置名称
+    // 查输入值(查检定项管理的详情)
+    // fetchItemInfo($route.query.itemId! as string, $route.query.itemCategoryName! as string, $route.query.belongStandardEquipment as string)
+  }
+  else {
+    itemFormData.value.itemCategoryName = $route.query.itemCategoryName as string // 设备检定项分类名称
+    itemFormData.value.itemCategoryId = $route.query.itemCategoryId as string// 设备检定项分类名称id
+    itemFormData.value.belongStandardEquipment = $route.query.belongStandardEquipment as string// 标准装置code
+    itemFormData.value.belongStandardEquipmentName = $route.query.belongStandardEquipmentName as string// 标准装置名称
+    // fetchInfo()
+  }
+})
+
+defineExpose({ checkout, itemFormData, templateFormAndTableRef, pageType })
+</script>
+
+<template>
+  <div class="measure-data-template-detail">
+    <template-form-and-table ref="templateFormAndTableRef" :page-type="pageType" />
+    <!-- 标签 -->
+    <detail-block :title="pageType !== 'detail' ? '检定数据' : ''" :class="pageType === 'detail' ? 'setBottom' : ''">
+      <el-radio-group v-if="pageType === 'detail'" v-model="current">
+        <el-radio-button v-for="item in radioMenus" :key="item.value" :label="item.value">
+          {{ item.name }}
+        </el-radio-button>
+      </el-radio-group>
+
+      <el-form
+        v-if="current === 'measure-data'"
+        ref="formRef"
+        :model="itemFormData"
+        label-width="140"
+        label-position="right"
+        style="margin-top: 20px;"
+      >
+        <el-row>
+          <!-- 外观  -->
+          <el-col :span="12">
+            <el-form-item label="外观及功能性检查:" prop="appearance">
+              <el-input
+                v-model="itemFormData.appearance"
+                class="full-width-input"
+                autosize
+                type="textarea"
+                :disabled="pageType === 'detail'"
+              />
+            </el-form-item>
+          </el-col>
+        </el-row>
+      </el-form>
+
+      <!-- 电源电压调整率 -->
+      <detail-block title="电源电压调整率">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="lineVoltageRegulationList" :columns="columns_line_voltage_regulation" :page-type="pageType" />
+      </detail-block>
+      <!-- 负载调整率 -->
+      <detail-block title="负载调整率">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="loadRegulationList" :columns="columns_load_regulation" :page-type="pageType" />
+      </detail-block>
+
+      <!--  电压表示值误差 -->
+      <detail-block title=" 电压表示值误差">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="voltageRepresentationValueErrorList" :columns="columns_voltage_representation_value_error" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 电流表示值误差（直接测量） -->
+      <detail-block title="电流表示值误差（直接测量）">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="ammeterDirectList" :columns="columns_voltage_representation_value_error" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 电流表示值误差（间接测量） -->
+      <detail-block title="电流表示值误差（间接测量）">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="ammeterIndirectList" :columns="columns_ammeter_indirect" :page-type="pageType" />
+      </detail-block>
+
+      <!--  纹波电压 -->
+      <detail-block title="纹波电压">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="rippleVoltageList" :columns="columns_ripple_voltage" :page-type="pageType" />
+      </detail-block>
+
+      <!--  输出电压短期稳定性 -->
+      <detail-block title="输出电压短期稳定性">
+        <template v-if="pageType !== 'detail'" #btns>
+          <el-button type="primary">
+            计算结果
+          </el-button>
+        </template>
+        <template-table :data="outputVoltageStabilityList" :columns="columns_output_voltage_stability" :page-type="pageType" />
+      </detail-block>
+
+      <!-- 历史修改记录 -->
+      <change-record v-show="pageType === 'detail' && current === 'change-record'" :info-id="infoId" />
+    </detail-block>
+  </div>
+</template>
+
+<style lang="scss">
+.measure-data-template-detail {
+  .el-radio__label {
+    display: block !important;
+  }
+}
+</style>
diff --git a/src/views/business/taskMeasure/measureData/components/second/templateTable.vue b/src/views/business/taskMeasure/measureData/components/second/templateTable.vue
new file mode 100644
index 0000000..f7de3bf
--- /dev/null
+++ b/src/views/business/taskMeasure/measureData/components/second/templateTable.vue
@@ -0,0 +1,172 @@
+<script lang="ts" setup name="NonthTemplateTable">
+import type { Ref } from 'vue'
+import { ElTable } from 'element-plus'
+import { defineExpose, ref } from 'vue'
+import type { TableColumn } from '@/components/NormalTable/table_interface'
+import { getDictByCode } from '@/api/system/dict'
+import type { dictType } from '@/global'
+
+// ------------------定义props、 emit-------------------
+const props = defineProps({
+  pageType: {
+    type: String,
+    default: 'detail',
+  },
+  // 数据
+  data: {
+    type: Array,
+    default() {
+      return []
+    },
+  },
+  // 表格高度
+  height: {
+    type: Number,
+    default() {
+      return null
+    },
+  },
+  // 数据列配置
+  columns: {
+    type: Array<TableColumn>,
+    default() {
+      return () => []
+    },
+  },
+  // 表格大小
+  size: {
+    type: String,
+    default: 'default',
+  }, // 表格大小，默认，small,mini等，与el-table条件相同
+})
+const emit = defineEmits(['change', 'selectionChange', 'rowClick', 'rowDbClick', 'multiSelect', 'filterChange'])
+// ------------------------------------------字典----------------------------------------------
+const paramsList = ref<dictType[]>([]) // 参数
+
+/**
+ * 获取字典
+ */
+function getDict() {
+  // 参数
+  getDictByCode('bizFirstStandardParams').then((response) => {
+    paramsList.value = response.data
+  })
+}
+
+// getDict()
+// -------定义数据--------------
+interface columnsCheckInfo {
+  text: string
+  show: boolean
+}
+const columnsChecked: Ref<columnsCheckInfo[]> = ref([])
+const table = ref<InstanceType<typeof ElTable>>()
+const singleChecked = ref('') // 单选选中id
+// 初始化列显示状态
+function initColumnsState() {
+  columnsChecked.value = []
+  for (const column of props.columns) {
+    columnsChecked.value.push({ text: column.text, show: !!column.show })
+  }
+}
+
+// 最终展示列
+const columnsFiltered: Ref<TableColumn[]> = ref([])
+// 切换列
+function changeColumns() {
+  columnsFiltered.value = []
+  for (const i in props.columns) {
+    if (columnsChecked.value[i].show === true) {
+      columnsFiltered.value.push(props.columns[i])
+    }
+  }
+}
+// 刷新
+function refresh() {
+  emit('change')
+}
+
+// 多选选中结果
+function selectionChange(selection: []) {
+  emit('selectionChange', selection)
+}
+// 点击行
+function rowClick(row: object, column?: any, event?: any) {
+  emit('rowClick', row)
+}
+// 双击行
+function rowDbClick(row: object, column?: any, event?: any) {
+  emit('rowDbClick', row)
+}
+// 监听columns
+watch(props.columns, (val) => {
+  initColumnsState()
+  changeColumns()
+})
+// 多选
+const handleSelectionChange = (val: any) => {
+  emit('multiSelect', val)
+}
+// 清除多选选中
+const clearMulti = () => {
+  console.log('清理选中')
+  table.value!.clearSelection()
+  singleChecked.value = ''
+}
+defineExpose({
+  clearMulti, initColumnsState,
+})
+onBeforeMount(() => {
+  initColumnsState()
+  changeColumns()
+})
+</script>
+
+<template>
+  <el-table
+    id="print"
+    ref="table"
+    :data="data"
+    :height="height"
+    border
+    stripe
+    :size="size"
+    style="width: 100%;"
+    @selection-change="handleSelectionChange"
+    @row-click="rowClick"
+    @row-dblclick="rowDbClick"
+  >
+    <!-- <el-table-column v-if="pageType !== 'detail'" type="selection" width="38" /> -->
+    <el-table-column align="center" label="序号" width="80" type="index" />
+    <el-table-column
+      v-for="item in columns"
+      :key="item.value"
+      :prop="item.value"
+      :label="item.text"
+      :width="item.width"
+      align="center"
+    >
+      <template #header>
+        <span v-show="item.required" style="color: red;">*</span><span>{{ item.text }}</span>
+      </template>
+    </el-table-column>
+  </el-table>
+</template>
+
+<style lang="scss" scoped>
+.single-table {
+  width: 100%;
+
+  :deep(.el-table th.el-table__cell:nth-child(1) .cell) {
+    visibility: hidden;
+  }
+}
+</style>
+
+<style lang="scss">
+.normal-table {
+  .el-radio__label {
+    display: none !important;
+  }
+}
+</style>
diff --git a/src/views/business/taskMeasure/measureData/detail.vue b/src/views/business/taskMeasure/measureData/detail.vue
index 3ee93a8..6c2c5ff 100644
--- a/src/views/business/taskMeasure/measureData/detail.vue
+++ b/src/views/business/taskMeasure/measureData/detail.vue
@@ -3,6 +3,7 @@
 import { ref } from 'vue'
 import { ElLoading, ElMessage } from 'element-plus'
 import FirstTemplateDetail from './components/first/templateDetail.vue'
+import SecondTemplateDetail from './components/second/templateDetail.vue'
 import ThirdTemplateDetail from './components/third/templateDetail.vue'
 import FourthTemplateDetail from './components/fourth/templateDetail.vue'
 import SixthTemplateDetail from './components/sixth/templateDetail.vue'
@@ -186,6 +187,8 @@
     </detail-page>
     <!-- 第一套：多功能校准源 -->
     <first-template-detail v-if="belongStandardEquipment === '1'" ref="templateDetailRef" :data-no="dataNo" :info-id="infoId" @giveInfoId="giveInfoId" />
+    <!-- 第2套：直流稳压电源标准装置 -->
+    <second-template-detail v-if="belongStandardEquipment === '2'" ref="templateDetailRef" :data-no="dataNo" :info-id="infoId" @giveInfoId="giveInfoId" />
     <!-- 第3套：多功能电气安全校准器标准装置 -->
     <third-template-detail v-if="belongStandardEquipment === '3'" ref="templateDetailRef" :data-no="dataNo" :info-id="infoId" @giveInfoId="giveInfoId" />
     <!-- 第四套：0.02级活塞式压力计 -->