package com.casic.missiles.enums;

/**
 * @Description: 打印&导出word/pdf配置模块枚举
 * @Author: wangpeng
 * @Date: 2023/8/28 16:31
 */
public interface PrintFileModuleNameEnum {

    String STAFF = "人员登记";
    String STAFF_EXCEL = "人员登记列表导出";
    String STAFF_PARAMETERS = "参数持证情况表";
    String CERTIFICATE_SITUATION_OF_PERSONNEL = "人员持证情况表";
    String STATISTICS_OF_AUTHORIZED_PERSONNEL_PARAMETERS = "授权人员参数情况统计表";
    String SIGN_IN_FORM = "培训签到表";
    String SUPPLIER = "合格供方名录";
    String OUTSOURCE_PROTOCOL = "测试、校准或检定工作分包协议书";
    String OUTSOURCE_ASSESS = "测试、校准或检定工作分包评审表";
    String OUT_ASSESS = "测试、校准或检定工作分包评审表";
    String OUTSOURCE_NOTICE = "测试、校准或检定工作分包通知表";
    String OUTSOURCER = "测试、校准或检定合格分包方名录";

    String CUSTOMER_SUGGEST_FORM = "委托方意见登记表";
    String CUSTOMER_RESULT_REVIEW_NOTICE = "检测结果复查通知单";
    String CUSTOMER_QUESTIONNAIRE = "委托方满意度调查表";
    String CUSTOMER_SITUATION = "委托方情况报告";
    String CUSTOMER_EXAMINE_FORM = "要求、委托书及合同评审表";
    String CUSTOMER_EXAMINE_FORM_SEAL = "要求、委托书及合同评审表盖章";

    String MEASURE_DATA = "检定数据管理";
    String MULTIFUNCTION_CHECK_DATA = "多功能核查数据";
    String CHECK_DATA_APPROVAL = "核查数据审批";
    String MEASURE_DATA_APPROVAL = "检定数据管理审批";
    String ORIGINAL_RECORD_APPROVAL = "检定数据原始记录审批";
    String PISTON_PRESSURE = "0.02活塞式压力";
    String RESISTANCE_CHECK_DATA = "活塞式压力";
    String MULTI_ELECTRICAL_SAFETY = "多功能电气安全";
    String ELECTRICAL_SAFETY_CHECK_DATA = "多功能电气安全核查数据";
    String DC_POWER_SUPPLY = "直流稳压电源";
    String SAFETY_VALVE = "安全阀";
    String SAFETY_VALVE_APPROVAL = "安全阀校验审批";
    String DC_POWER_SUPPLY_CHECK_DATA = "直流稳压电源核查数据";
    String RESISTANCE_THERMOMETER = "二等铂电阻温度计";
    String RESISTANCE_THERMOMETER_CHECK_DATA = "二等铂电阻温度计核查数据";
    String POINT_METER = "精密露点仪";
    String POINT_METER_CHECK_DATA = "精密露点仪核查数据";
    String ETWO_WEIGHT = "E2等级砝码";
    String ETWO_WEIGHT_CHECK_DATA = "E2等级砝码核查数据";
    String SPECTRUM_ANALYZER = "频谱分析仪";

    String OSCILLOSCOPE = "示波器";
    String OSCILLOSCOPE_CHECK_DATA = "示波器核查记录";

    String CESIUM_ATOMIC_FREQUENCY = "铯原子频率";

    String SIGNAL_GENERATOR = "信号发生器";
    String SIGNAL_GENERATOR_CHECK_DATA = "信号发生器核查数据";

    String LOW_FREQUENCY_SIGNAL_SOURCE = "低频信号源";
    String LOW_POWER = "小功率";
    String LOW_FREQUENCY_SIGNAL_SOURCE_CHECK_DATA = "低频信号源核查数据";
    String LOW_POWER_CHECK_DATA = "小功率核查数据";
    String MICROWAVE_ATTENUATION = "微波衰减";
    String MICROWAVE_DEVICE = "微波器件";
    String VECTOR_NETWORK_ANALYZER = "矢量网络分析仪";
    String S_PARAM = "S参数";
    String SHORT_TERM_FREQUENCY_STABILITY = "短期频率稳定度";
    String DISTORTION_DEGREE = "失真度";

    String FILE_CHANGE_FORM = "文件更改申请单";
    String FILE_GRANT_NOTICE_FORM = "文件发放通知单";
    String CONSUMABLE_GOODS_APPLY_FORM = "易耗物资申请单";
    String GOODS_ACCEPTANCE_APPLY_FORM = "物资验收记录";
    String GOODS_WAREHOUSE = "物资入库单";


    /**
     * 质量活动
     */
    String QUALITY_SUPERVISION_RECORD = "质量监督记录";
    String QUALITY_SUPERVISION_REPORT = "质量监督报告";
    String QUALITY_NON_CONFORMANCE_REPORT = "质量不符合要求情况分析报告";
    String QUALITY_AUDIT_PLAN = "质量活动内部审核计划";
    String QUALITY_SCENE_AUDIT_PLAN = "质量活动现场审核计划";
    String QUALITY_WORK_REGISTRATION = "内部审核工作登记表";
    String QUALITY_CORRECTIVE_RECORD = "纠正措施处理单";
    String QUALITY_REVIEW_FORM = "内部审核检查表";
    String QUALITY_INTERNAL_AUDIT_REPORT = "内部审核报告";
    String QUALITY_REVIEW_PLAN = "管理评审计划";
    String QUALITY_MANAGEMENT_REPORT = "质量管理体系运行报告";
    String QUALITY_TARGET_EVALUATION_REPORT = "质量目标评测报告";
    String QUALITY_REVIEW_REPORT = "管理评审报告";
    String QUALITY_EFFECTIVE_ANALYSIS = "有效性综合分析报告";
    String QUALITY_PREVENT_RECORD = "预防措施处理单";
    String QUALITY_NON_REVIEW_REPORT = "内部审核不符合项报告";
    String QUALITY_TECHNICAL_ANALYSIS_REPORT = "技术能力分析报告";


    /**
     * 资源管理
     */
    String RESOURCE_STAFF_AUTHORIZE_ORDER = "授权（代理）委托书";
    String RESOURCE_STAFF_TRAIN_INFO = "训练登记表";
    String RESOURCE_SUPPLIER_SERVICE_EVALUATE = "外部服务评价表";
    String RESOURCE_SUPPLIER_CONSUMABLE_GOODS_EVALUATE = "易耗物资供方评价表";
    String RESOURCE_SUPPLIER_EVALUATE = "设备供方评价表";
    String RESOURCE_SEAL_INFO = "印章管理登记表";
    String RESOURCE_SEAL_USE_NOTE = "印章使用登记表";
    String RESOURCE_FILE_METHOD_CONFIRM = "方法确认登记表";
    String CUSTOMER_CONTRACT_EXECUTION_CHANGE = "合同执行变更登记表";
    String RESOURCE_FILE_METHOD_NOVELTY_SEARCH = "测试校准检定方法查新记录表";
    String RESOURCE_SUPPLIER_CONSUMABLE_GOODS_USE = "易耗物资使用记录";
    String RESOURCE_SUPPLIER_ABANDON_GOODS_HANDLE = "废弃物资处理交接记录";
    String RESOURCE_ENVIRONMENT_REQUIRE = "工作间环境条件要求一览表";
    String RESOURCE_FILE_RECALL_ARCHIVE = "文件作废登记表";
    String RESOURCE_ENVIRONMENT_RESISTANCE = "实验室接地电阻记录";
    String RESOURCE_ENVIRONMENT_VOLTAGE = "工作间供电电压记录";
    String RESOURCE_ENVIRONMENT_UPS = "UPS蓄电池内阻测试记录";
    String TECHNIQUE_FILE_SEAL = "现行测试校准检定方法盖章";
    String FILE_APPROVAL = "文件审批封面"; //类型为质量手册\程序文件\作业指导书，需要补充封皮，并在审批通过后在封皮处补充审批人电子签名
    String FILE_APPROVAL_OTHER = "文件审批其他类型文件"; //类型为其他，无需补充封皮，用户需要上传一个带填充标签的word，审批通过后，加盖计量站章
    String CONTRACT_EXECUTION_SEAL = "合同执行变更登记表盖章";
    String SYSTEM_FILE_SEAL = "体系文件盖章";

    /**
     * 计量检定业务
     */
    String BUSINESS_SITE_EXECUTIVE = "现场测试、校准或检定审批单";
    String BUSINESS_SITE_EXECUTIVE_LOG = "现场测试、校准或检定工作记录表";
    String BUSINESS_CERTIFICATE_CHANGE_APPLY = "证书/报告补充或更换申请单";
    String EXPORT_TEMPLATE = "导出模板";
    String OTHER = "4";
    String BUSINESS_INTERCHANGE_INFO = "仪器仪表交接单";
    String CERTIFICATE_CHANGE_SUPPLY = "对编号为XXX证书报告的补充件";


    /**
     * 设备与装置
     */
    String EQUIPMENT_INFO = "设备台账信息";
    String TECHNICAL_CAPABILITIES_XICHANG = "西昌技术能力范围表";
    String TECHNICAL_CAPABILITIES_HAIKOU = "海口技术能力范围表";
    String SUPPORT_EQUIPMENT_XICHANG = "西昌配套设备一览表";
    String SUPPORT_EQUIPMENT_HAIKOU = "海口配套设备一览表";
    String UNPACKING_ACCEPTANCE = "开箱验收管理";
    String EQUIPMENT_LEND = "设备借出管理";
    String EQUIPMENT_BORROWING = "设备借用管理";
    String EQUIPMENT_STATUS_ENABLE = "设备启封登记表";
    String EQUIPMENT_STATUS_UNABLE = "设备封存登记表";
    String EQUIPMENT_STATUS_DISCARD = "设备报废登记表";
    String EQUIPMENT_STATUS_DISABLE = "设备禁用登记表";
    String EQUIPMENT_PACKING = "设备运输装箱管理";
    String EQUIPMENT_TRANSPORTATION_PROCESS = "设备运输过程管理";
    String EXCEPTION_HANDLING_ONE = "异常情况处置处理1";
    String EXCEPTION_HANDLING_TWO = "异常情况处置处理2";
    String EQUIPMENT_TRACE_PLAN_E = "溯源计划E版";
    String EQUIPMENT_TRACE_PLAN_REPORT = "溯源计划-上报版";
    String EQUIPMENT_TRACE_RESULT_COMPLETE_SITUATION = "溯源完成情况表";
    String EQUIPMENT_TRACE_RESULT_CONFIRM = "溯源结果确认";
    String STANDARD_BUILD_REPORT_FILE = "建标报告";
    String STANDARD_BUILD_EXAM_TABLE_FILE = "考核表";
    String STANDARD_BUILD_RELATION_FILE = "量值溯源与传递等级关系图";
    String STANDARD_BUILD_RELATION_FILE_SEAL = "量值溯源与传递等级关系图盖章";
    String EQUIPMENT_MAINTAIN = "周维护月保养";

    /**
     * 在用软件
     */
    String SOFTWARE_REVISION_REQUEST = "软件修订申请";
    String SOFTWARE_REVIEW_REPORT = "软件评审报告";

}