diff --git a/casic-metering-common/src/main/java/com/casic/missiles/enums/business/MeasureCategoryEnum.java b/casic-metering-common/src/main/java/com/casic/missiles/enums/business/MeasureCategoryEnum.java
index 2d0041f..ba5cff0 100644
--- a/casic-metering-common/src/main/java/com/casic/missiles/enums/business/MeasureCategoryEnum.java
+++ b/casic-metering-common/src/main/java/com/casic/missiles/enums/business/MeasureCategoryEnum.java
@@ -156,7 +156,199 @@
     String BIMETAL_THERMOMETER = "双金属温度计";
     String TEMPERATURE = "温度值";
     String RTP = "RTP值";
+
+    String REFERENCE_POINT = "参考点";
+    String START_POINT = "起点";
+
+    /**
+     * 频谱分析仪开始
+     * <p>
+     * 频率显示
+     */
+    String FREQUENCY_DISPLAY = "1";
+
+    /**
+     * 扫频宽度
+     */
+    String SWEEP_WIDTH = "2";
+
+    /**
+     * 中频带宽
+     */
+    String IF_BANDWIDTH = "3";
+
+    /**
+     * 中频带宽转换偏差
+     */
+    String IF_BANDWIDTH_CONVERSION_DEVIATION = "4";
+
+    /**
+     * 参考电平
+     */
+    String REFERENCE_LEVEL = "5";
+
+    /**
+     * 垂直刻度（显示位置从上到下）
+     */
+    String VERTICAL_SCALE = "6";
+
+    /**
+     * 输入频响
+     */
+    String INPUT_FREQUENCY_RESPONSE = "7";
+
+    /**
+     * 平均噪声电平
+     */
+    String AVERAGE_NOISE_LEVEL = "8";
+
+    /**
+     * 谐波失真
+     */
+    String HARMONIC_DISTORTION = "9";
+
+    /**
+     * 输入衰减
+     */
+    String INPUT_ATTENUATION = "10";
+
+    /**
+     * 1dB增益压缩点
+     */
+    String GAIN_COMPRESSION_POINT = "11";
+
+    /**
+     * 校准信号
+     */
+    String CALIBRATION_SIGNAL = "12";
+
+    /**
+     * 频率
+     */
+    String FREQUENCY = "1";
+    /**
+     * 功率
+     */
+    String POWER = "2";
+    /**
+     * 相对电平
+     */
+    String RELATIVE_LEVEL = "3";
+    /**
+     * 频率CN
+     */
+    String FREQUENCY_CN = "频率";
+    /**
+     * 幅度
+     * 频谱分析仪结束
+     */
+    String AMPLITUDE = "幅度";
+
+    /**
+     * 示波器开始
+     * 扫描时间系数及扩展
+     */
+    String SCAN_TIME_COEFFICIENT_AND_EXPANSION = "1";
+
+    /**
+     * 垂直幅度测量
+     */
+    String VERTICAL_AMPLITUDE_MEASUREMENT = "2";
+
+    /**
+     * 频带宽度
+     */
+    String FREQUENCY_BAND_WIDTH = "3";
+
+    /**
+     * 触发特性
+     */
+    String TRIGGER_CHARACTERISTICS ="4";
+
+    /**
+     * 输入电阻
+     */
+    String INPUT_RESISTANCE = "5";
+
+    /**
+     * 上升时间
+     */
+    String RISE_TIME = "6";
+
+    /**
+     * 时基
+     */
+    String TIME_BASE = "1";
+    /**
+     * 直流增益
+     */
+    String DC_GAIN = "2";
+    /**
+     * 直流偏置
+     */
+    String DC_OFFSET = "3";
+    /**
+     * 频带宽度
+     */
+    String OSCILLOSCOPE_FREQUENCY_BAND_WIDTH = "4";
+    /**
+     * 触发灵敏度
+     */
+    String TRIGGER_SENSITIVITY = "5";
+    /**
+     * 输入电阻
+     */
+    String OSCILLOSCOPE_INPUT_RESISTANCE = "7";
+    /**
+     * 数字示波器校准信号
+     */
+    String SIGNAL = "8";
+    /**
+     * 校准信号
+     * 示波器结束
+     */
+    String OSCILLOSCOPE_CALIBRATION_SIGNAL = "7";
+
+
     String INSULATION_RESISTANCE_METER_CALIBRATION = "绝缘电阻表校准";
+
+    String DIGITAL_OSCILLOSCOPE = "数字示波器";
+
+    String ANALOG_OSCILLOSCOPE = "模拟示波器";
+
+    String HOUR_MARKERS = "1";
+    String SQUARE_WAVE_VOLTAGE_50 = "2";
+    String SQUARE_WAVE_VOLTAGE_1M = "3";
+    String DC_VOLTAGE_50 = "4";
+    String DC_VOLTAGE_1M = "5";
+    String INPUT_IMPEDANCE = "6";
+    String SINE_SIGNAL_FLATNESS = "7";
+    String RISE_TIME_CHECK = "8";
+
+    /**
+     * <p>
+     *     铯原子开始
+     *     晶振
+     */
+    String CRYSTAL_OSCILLATOR = "晶振";
+    String RUBIDIUM_CLOCK = "铷钟";
+    String UNIVERSAL_COUNTER = "通用计数器";
+    String MICROWAVE_COUNTER = "微波计数器";
+
+    String FREQUENCY_SIGNAL_OUTPUT_AMPLITUDE = "1";
+    String SECOND_PULSE_OUTPUT = "2";
+    String FREQUENCY_STABILITY = "3";
+    String RELATIVE_FREQUENCY_DEVIATION = "4";
+    String FREQUENCY_REPRODUCIBILITY = "5";
+    String DAILY_AGING_RATE_OF_CRYSTAL_OSCILLATOR = "6";
+
+    /**
+     * <p>
+     *     铯原子结束
+     *     微波计数器
+     */
+
+
     /**
      * 结论-合格
      */